Lucent Technologies 560-201-113 manual

Installing and Configuring the PassageWay

Service Provider

4.If you are installing from diskette, insert diskette #1 of the PassageWay Service Provider software into the diskette drive of your PC.

If you are installing from CD-ROM, insert the CD-ROM of the PassageWay Service Provider into the CD-ROM drive of your PC.

If you are installing from a shared directory on a network server, proceed to Step 5.

5.Perform one of the following steps:

If you have Windows 95 or Windows NT 4.0 or later:

a.From the Task Bar, click on the Start button. The Start menu appears.

b.Select Run.

The Run dialog box appears.

If you have Windows 3.1 or later, select Run from the File menu of Program Manager. The Run dialog box appears.

6.Depending on whether you are installing from a diskette, CD-ROM, or a shared directory, perform one of the following steps:

If the diskette is in drive A, type a:\setup in the Command Line box, and choose the OK button. If the diskette is in drive B, type b:\setup in the Command Line box, and choose the OK button.

If the CD-ROM is in drive D, type d:\setup in the Command Line box, and choose the OK button.

If you are installing from a shared directory, type the shared directory path (including the drive letter) provided by your Network Administrator and setup in the Command Line box, and choose the OK button.

The PassageWay for PARTNER Service Provider Setup dialog box is displayed.

2-15