Installing and Configuring the PassageWay
Service Provider
If you are using Windows 95 or Windows NT 4.0 or later, the Creating Application Folder & Short Cuts message box appears.
If you are using Windows 3.1 or later, the Creating Program Group & Icons message box appears.
13.Choose the OK button.
The Installation Completed message box appears.
14.Choose the Finish button.
If you are using Windows 95 or Windows 4.0 or later, the PassageWay Configurator is launched, and it displays the Find PassageWay Link dialog box.
If you are using Windows 3.1 or later, the Configuring PassageWay Service Provider message box appears. Perform the following steps:
a.Choose the OK button in the Configuring PassageWay Service Provider message box.
The Telephony window appears.
b.In the Telephony window, choose the Driver Setup button. The Telephony Drivers dialog box appears.
c.Perform one of the following steps:
If the Lucent PassageWay Service Provider is listed in the
Telephony Drivers dialog box, select it, and then choose the
TSetup button.
If the Lucent PassageWay Service Provider is not listed in the Telephony Drivers dialog box:
i. Choose the Add button.
The Add Driver dialog box appears.
ii.Select the Lucent PassageWay Service Provider, and then choose the Add button.