Sterling SSPET 5 Technical data, Basic Version, Optional Features, Performance

Page 45

SSPET5

6. Technical data

Basic Version

Integrated control SSE / SSP

Integrated vacuum pump

Two component valve output

Parts coming in contact with material are made of stainless steel

Simple mounting to dosing and blending units due to compact and weight sav- ing design

Optional Features

Integrated filter with automatic filter cleaning

Alarm output

Granulator output

Automatic shut-down with lack of material

Performance

Typical conveying capacity

SSPET5: up to 300 kg/hr (660 lbs/hr)

Hopper loader capacity SSPET5: approx. 5 l (0.28 cf.)

Connected load 230 V, AC, 50/60 Hz, 1.2 kW

SM4-630

Technical data 44

Image 45
Contents Sterling Material Processing SspetParts and Service Department Telephone 800 Edition 02/01 Sterling order confirmation no Technical serviceSSPET5 Table of contents Technical data Parts list Accessories MaintenanceSafety instructions Safety instructionsSSPET5 Explanations and information For your safety SSPET5 SSPET5 For the operating safety of the equipment Assembly instructions Assembly Assembly SM4-630 Mounting the suction pipe MV Electrical connection Installation of the signal line of the SKW optional Installation of the flap switch signal lineSSPET5 Compressed-air supply Functional description General Controller SSE SSPET5 Controller SSP Putting into operation Checking the pipe system Adjusting the suction pipes If the conditions points 3 + 4 are not metIf the conditions points 3 + 4 are met Setting the conveying time Setting the controller SSETurbine is running but no material is being conveyed Conveying capacity is too lowChange-over key Setting the line clear timeSetting the time interval Setting the controller SSPInitial conveying operations Alarm Messages displayed on the controller SSESSPET5 Switching off the unit Alarm Messages displayed on the controller SSPMaintenance SSPET5 Maintenance intervals Servicing the conveyor Removal InstallationChanging the sealing ring of the outlet flap Adjusting the flap switch Replacing carbon brushes at turbine Installation Optional Features Technical dataTechnical data Basic VersionDimension Sheet Parts list SSPET5 Pos Order no Designation Accessories