Siemens FX300 manual Contents

						CONTENTS
	SITRANS FX300
1			Safety instructions			6
			1.1	Intended use		6
			1.2	Certifications		7
			1.3	Safety instructions from the manufacturer		8
			1.3.1 Copyright and data protection			8
			1.3.2 Disclaimer			8
			1.3.3		Product liability and warranty	9
			1.3.4 Information concerning the documentation			9
			1.3.5 Warnings and symbols used			10
			1.4	Safety instructions for the operator		10
		2 Device description				11
			2.1	Scope of delivery		11
			2.2	Instrument versions		11
			2.2.1 Devices with connection flange			12
			2.2.2 Sandwich version			12
			2.2.3 Device description			13
			2.2.4 Free air delivery measurement - FAD (optional)			13
			2.2.5 Gross heat meter			14
			2.2.6 Dual seal			15
			2.3	Nameplate		16
3			Installation			17
			3.1	Notes on installation		17
			3.2	Storage		17
			3.3	Transport		17
			3.4	Installation condtitions		18
			3.4.1 Measurement of liquids			19
			3.4.2 Measurement of vapours and gases			21
			3.4.3		Pipelines with control valve	22
			3.4.4 Preferred mounting position			22
			3.4.5 Turning the connection housing			23
			3.4.6 Turning the display			24
			3.4.7 Heat insulation			25
			3.5	Inlet and outlet runs		26
			3.5.1 Minimum inlet runs			26
			3.5.2 Minimum outlet runs			27
			3.5.3 Flow straightener			27
			3.6	Installation		28
			3.6.1		General installation notes	28
			3.6.2		Installing devices in flange design	29
			3.6.3 Installing devices in sandwich design			30

06/2009 - SFIDK.PS.050.F2.02 A5E02100423 www.siemens.com/flow 3