Fostex VM08 Mute of the various input channel/master output, To set to the present fader position

Page 13

Model VM08 Owner’s Manual

<CAUTION>

If [Fader Fix mode], discussed below, in the [Setup mode] is set to [ON], no signal will be output even though the fader is moved. The [FADER FIX mode] is set to [OFF]. For details refer to [Setup mode] on page 27.

Mute of the various input channel/master output:

Mute ON/OFF of channels 1 ~ 4, 5/6, 7/8 and master output can be done using the CH ON/CH SEL key. Normally, the CH ON/CH SEL keys for channels 1 ~ 4, 5/6, 7/8 and MASTER are all ON (key LED is lit). Therefore, when the CH ON/CH SEL key of the channel you wish to mute is pressed, sound from that channel only will be muted (the CH ON/CH SEL key LED of the channel that was pressed will be extinguished). Mute ON/OFF alternates with each pressing of the CH ON/CH SEL key.

Mute ON channel (LED is off).

<Useful information !>

In addition to operating with the CH ON/CH SEL key, mute ON/OFF of master output is also possible using the foot switch (Optional Model 8051).

In the foot switch functional setting is set for [Mute function of master output] in the [Setup mode] of the VM08, mute can be executed by stepping on the foot switch. For details on the [Setup mode], please refer to page 27.

<Useful information !>

In the normal mix mode, if the position of the INPUT fader/MASTER fader before switching off power is different from when power is switched on (refer to schematic below), the FADER ADJUST and LEVEL ADJUST key LED’s (red) will flash. This is because the fader setting before switching off power is in memory, and the VM08 is indicating that fader and level adjustment is possible.

The fader position can be reset to the position prior to switching off power, and the level position can be deliberately set to the present sound volume setting.

* To return to the setting before switching off power:

Press the flashing FADER ADJUST key (It will enter the fader adjust mode). Subsequently, adjust each fader position by referring to [Fader adjust mode] explanation.

* To set to the present fader position:

Press the flashing LEVEL ADJUST key and the VM08 will enter the level adjust mode. Then setup by following [Level adjust mode] on page 27.

If it is not necessary to match the fader positions, the FADER ADJUST key flashing will extinguished after all faders are moved and the VM08 will return to the normal mix mode.

<Setting before switch off of power>

<Setting at switch on again of power>

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Model Safety Instructions Table of Contents Names and Functions Status indicator Contrast adjusting knobFader adjust key Level adjust keyInternal battery for the memory back up Reset of VM08Remove the insulation paper Please remember thisST.OUT L, R jack Peripheral Equipment ConnectionInput 1 ~ 4 jacks Input 5/6 Input 7/8 jacksInput 5/6, Input 7/8 jacks Input 5/6 7/8 and AUX Send 1/2 jacksAUX Send OUT 1/2 jack Example-2 To use as a Mono IN/STEREO OUT effects Application ExampleExample-3 For use as a sub-mixer for a live keyboard player Example-4 To use as a small facility mixerExample-6 To produce original Remix Example-5 For one take live studio recordingExample-7 To do you own Sound Track Video Editing Example-8 As a practice aid for your musical instrumentsVM08 Initial State Useful information Normal Mix ModeCharacter display section Master fader display sectionSetting before switch off of power To return to the setting before switching off powerMute of the various input channel/master output To set to the present fader positionSetup method for PAN setting Channel Parameter Edit ModeNumber is adjusted with the Data encoder Setup method of the Effect Send level Setup method for EQ settingExample Character display section when LO is made to light Number is set with the Data encoderExample Character section when E1 is lit Setup method of the AUX Send levelExample The character display section with light up A1 Example The character display section with E1 is lit PRE/POST setup method for Effect SEND/AUX SendP. Fostex Advanced Signal Processing Technology Effect Edit ModeAbout the effect types Effect types preset for EFFWhen the EFF 2 key is pressed When the EFF 1 key is pressedSelecting the effect type Use the Data encoder to select the effect typeTo cancel muting Effect parameter settingsMuting an effect To mute the effect soundEffect parameter details Doubling effect parameters parameter type Doubling Delay pitch effect parameters parameter type Delay PitchChorus effect parameters parameter type Chorus Flanger effect parameters parameter type FlangeStoring a scene memory Scene Memory ModeRecalling a scene memory Press the Scene Store keyFader adjust Level adjustPress the Level Adjust key Press the Fader Adjust keyClearing a scene memory Directly recalling a scene memoryHold down the Exit key and press the Scene Recall key Press the EFF 1 key or EFF 2 keyMaking settings in setup mode Setup ModeDetails of the setup menu Channel fader recall setting Display ChFdrRcl ? Fader Fix setting Display FaderFix ?Master fader recall setting Display MsFdrRcl ? Foot Switch setting Display Foot Sw ?Input 1 ~ SpecificationsInput 5/6 ~ 7/8 AUX Send 1/2Declaration of EC Directive
Top Page Image Contents