Fostex VM08 owner manual Selecting the effect type, When the EFF 1 key is pressed

Model VM08 Owner’s Manual

Effect types preset for EFF 2

Name Parameter type Explanation

1

~1--28 are the same effect types as the EFF 1 presets listed on the preceding page. (For details refer to the preceding page.)

28
29	MonoDELAY	DELAY	Mono delay
30	PanDELAY	DELAY	Panning delay
31	MonoBpmDL	BPM DELAY	Mono delay. Specify BPM and note value to set the delay time.
32	PanBpmDL	BPM DELAY	Panning delay. Specify BPM and note value to set the delay time.
33	Short DL	SHORT DELAY	Short delay that allows you to set the delay time precisely.
34	DOUBLING	DOUBLING	Doubling that allows you to set separate delay times for L and R.
35	CHORUS	CHORUS	Produces a chorus effect. A doubling effect can also be added.
36	FLANGE	FLANGE	Produces a flanging effect.
37	MonoPITCH	MONO PITCH	Pitch shift adjustable in a +/-2 octave range.
38	DlyPITCH	DELAY PITCH	Pitch shift with a feedback delay, allowing strange effects to be produced.

Selecting the effect type

Here's how to select the effect type for EFF 1 or EFF 2.

Press this to set the effect type for EFF 1.

Press this to set the effect type for EFF 2.

*As described earlier in "Normal mix mode," raise the INPUT fader of a channel to which a signal is being input and raise the MASTER fader, so that the sound is heard at an appropriate level.

*As described earlier in "Setting the effect send level," raise the EFF 1 SEND level or the EFF 2 SEND level for the channel(s) to which you wish to apply the effect.

1.If you wish to set EFF 1, press the EFF EDIT mode EFF 1 key. To set EFF 2, press the EFF 2 key.

With the initial settings, the following displays will appear.

When the EFF 1 key is pressed:

With the initial settings, [Norm HALL] will ap- pear.

When the EFF 2 key is pressed:

With the initial settings, [CHORUS] will appear.

2.Use the DATA encoder to select the effect type.

The effect types listed in the foregoing tables will appear in succession. When an effect type appears, it will be blinking. The blinking indi cates that the effect type has not yet been selected.

20