Fostex VM08 Level adjust, Fader adjust, Press the Level Adjust key, Press the Fader Adjust key

Page 25

2.Rotate the DATA encoder to select the scene number [00]--[20] that you wish to recall.

As the scene number changes, the corresponding scene name will be displayed.

3.Press the ENTER key.

The scene will be recalled.

Model VM08 Owner’s Manual

< Note >

*The contents that are recalled will depend on the Setup mode settings "Channel fader recall" and "Master fader recall" described later in this manual. For details refer to "Setup mode" later in this manual.

*Regardless of the position of the faders when a scene is recalled, the sound will be output at the stored volumes from the instant of the recall. If you are monitoring through head phones, be careful of the sudden loud sounds that may occur when a scene is recalled.

Level adjust

When the physical fader locations and the actual volumes do not match (for example, after a scene memory has been recalled), you can use this function to force the volume levels to the current fader locations.

1.Press the LEVEL ADJUST key.

The display will ask [Level Adj?].

Blinking

2. Press the ENTER key.

The Level Adjust operation will be executed. This will cause the volumes to change to the current fader locations.

Fader adjust

When the physical fader locations and the actual volumes do not match (for example, after a scene memory has been recalled), you can use this function to manually adjust the fader loca- tions.

< Note >

Fader Adjust will function in Normal Mix mode as well as after a scene is recalled. In Normal Mix mode, the FADER ADJUST key / LEVEL ADJUST key will blink to indicate that the fader locations before the VM08's power is turned off are different than the fader locations when the power was turned on.

1.Press the FADER ADJUST key.

The display will indicate [Fader Adj]. The level section of the display will show dots to indicate the current locations of the faders, and blinking dots to indicate the current actual volume

levels.Blink

Raising or lowering the faders will not affect the actual volume that you are hearing.

EQ

Lit

2.Move each fader so that the lit dots move to the locations of the blinking dots.

Move each fader so that the lit dots coincide with the blinking dots.

3.Press the EXIT button to exit the Fader Adjust function.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Model Safety Instructions Table of Contents Names and Functions Status indicator Contrast adjusting knobFader adjust key Level adjust keyInternal battery for the memory back up Reset of VM08Remove the insulation paper Please remember thisST.OUT L, R jack Peripheral Equipment ConnectionInput 1 ~ 4 jacks Input 5/6 Input 7/8 jacksInput 5/6, Input 7/8 jacks Input 5/6 7/8 and AUX Send 1/2 jacksAUX Send OUT 1/2 jack Example-2 To use as a Mono IN/STEREO OUT effects Application ExampleExample-3 For use as a sub-mixer for a live keyboard player Example-4 To use as a small facility mixerExample-6 To produce original Remix Example-5 For one take live studio recordingExample-7 To do you own Sound Track Video Editing Example-8 As a practice aid for your musical instrumentsVM08 Initial State Useful information Normal Mix ModeCharacter display section Master fader display sectionSetting before switch off of power To return to the setting before switching off powerMute of the various input channel/master output To set to the present fader positionSetup method for PAN setting Channel Parameter Edit ModeNumber is adjusted with the Data encoder Setup method of the Effect Send level Setup method for EQ settingExample Character display section when LO is made to light Number is set with the Data encoderExample Character section when E1 is lit Setup method of the AUX Send levelExample The character display section with light up A1 Example The character display section with E1 is lit PRE/POST setup method for Effect SEND/AUX SendP. Fostex Advanced Signal Processing Technology Effect Edit ModeAbout the effect types Effect types preset for EFFWhen the EFF 2 key is pressed When the EFF 1 key is pressedSelecting the effect type Use the Data encoder to select the effect typeTo cancel muting Effect parameter settingsMuting an effect To mute the effect soundEffect parameter details Doubling effect parameters parameter type Doubling Delay pitch effect parameters parameter type Delay PitchChorus effect parameters parameter type Chorus Flanger effect parameters parameter type FlangeStoring a scene memory Scene Memory ModeRecalling a scene memory Press the Scene Store keyFader adjust Level adjustPress the Level Adjust key Press the Fader Adjust keyClearing a scene memory Directly recalling a scene memoryHold down the Exit key and press the Scene Recall key Press the EFF 1 key or EFF 2 keyMaking settings in setup mode Setup ModeDetails of the setup menu Channel fader recall setting Display ChFdrRcl ? Fader Fix setting Display FaderFix ?Master fader recall setting Display MsFdrRcl ? Foot Switch setting Display Foot Sw ?Input 1 ~ SpecificationsInput 5/6 ~ 7/8 AUX Send 1/2Declaration of EC Directive
Top Page Image Contents