Fostex VM08 owner manual Setup Mode, Making settings in setup mode, Details of the setup menu

Page 27

Model VM08 Owner’s Manual

Setup Mode

In Setup mode you can make the following settings to specify how the VM08 will operate.

1.INPUT 5/6 setting (specify INPUT 5/6 as stereo or mono input)

2.INPUT 7/8 setting (specify INPUT 7/8 as stereo or mono input)

3.Fader Fix setting (turn Fader Fix mode on/off)

4.ChFdrRcl setting (turn Recall mode on/off for the channel faders)

5.MsFdrRcl setting (turn Recall mode on/off for the master fader)

6.Foot Sw setting (specify the function of the foot switch)

7.BattVolt check (check the voltage of the internal battery)

Making settings in setup mode

To make settings in Setup mode, use the following procedure to select the menu item that contains the setting you wish to change. (However, the internal battery check is for display only, and cannot be modified.)

1.Simultaneously press the EFFECT EDIT keys EFF 1 and EFF 2.

You will enter Setup mode.

The previously-selected setup menu item will appear.

Lit

Blinking

4.Use the DATA encoder to select the desired setting.

For details on the available settings, refer to the following page.

2.Use the DATA encoder to select the desired setup menu item.

3.Press the ENTER key.

The currently selected item will blink in the display.

5.Press the ENTER key.

The selection will be finalized, and you will return to the display of <step 1>.

6.Press the EXIT key.

You will return to Normal Mix mode.

Details of the setup menu

INPUT 5/6 input setting (Display: [Input5/6?])

Here you can specify the input mode for IN- PUT 5/6.

<Settings> Stereo (default) In 5>Mono

If Stereo is selected, the INPUT 5/6 jack will be used in stereo input mode, and separate sig- nals will be sent to channels 5 and 6. Use this setting when inputting a stereo signal. If In 5>Mono is selected, mono input mode will be used, and the same signal will be input to chan- nels 5 and 6. Use this setting when inputting a mono signal. For more about the INPUT 5/6 jack, refer to p.8 "Connecting other equipment."

INPUT 7/8 input setting (Display: [Input7/8?])

Here you can specify the input mode for INPUT 7/8.

<Settings> Stereo (default) In 7>Mono

If Stereo is selected, the INPUT 7/8 jack will be used in stereo input mode, and separate sig- nals will be sent to channels 7 and 8. Use this setting when inputting a stereo signal. If In 7>Mono is selected, mono input mode will be used, and the same signal will be input to chan- nels 7 and 8. Use this setting when inputting a mono signal. For more about the INPUT 7/8 jack, refer to p.8 "Connecting other equipment."

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Model Safety Instructions Table of Contents Names and Functions Level adjust key Contrast adjusting knobStatus indicator Fader adjust keyPlease remember this Reset of VM08Internal battery for the memory back up Remove the insulation paperInput 5/6 Input 7/8 jacks Peripheral Equipment ConnectionST.OUT L, R jack Input 1 ~ 4 jacksInput 5/6 7/8 and AUX Send 1/2 jacks Input 5/6, Input 7/8 jacksAUX Send OUT 1/2 jack Example-4 To use as a small facility mixer Application ExampleExample-2 To use as a Mono IN/STEREO OUT effects Example-3 For use as a sub-mixer for a live keyboard playerExample-8 As a practice aid for your musical instruments Example-5 For one take live studio recordingExample-6 To produce original Remix Example-7 To do you own Sound Track Video EditingVM08 Initial State Master fader display section Normal Mix ModeUseful information Character display sectionTo set to the present fader position To return to the setting before switching off powerSetting before switch off of power Mute of the various input channel/master outputChannel Parameter Edit Mode Setup method for PAN settingNumber is adjusted with the Data encoder Number is set with the Data encoder Setup method for EQ settingSetup method of the Effect Send level Example Character display section when LO is made to lightSetup method of the AUX Send level Example Character section when E1 is litExample The character display section with light up A1 Example The character display section with E1 is lit PRE/POST setup method for Effect SEND/AUX SendP. Fostex Advanced Signal Processing Technology Effect Edit ModeAbout the effect types Effect types preset for EFFUse the Data encoder to select the effect type When the EFF 1 key is pressedWhen the EFF 2 key is pressed Selecting the effect typeTo mute the effect sound Effect parameter settingsTo cancel muting Muting an effectEffect parameter details Flanger effect parameters parameter type Flange Delay pitch effect parameters parameter type Delay PitchDoubling effect parameters parameter type Doubling Chorus effect parameters parameter type ChorusPress the Scene Store key Scene Memory ModeStoring a scene memory Recalling a scene memoryPress the Fader Adjust key Level adjustFader adjust Press the Level Adjust keyPress the EFF 1 key or EFF 2 key Directly recalling a scene memoryClearing a scene memory Hold down the Exit key and press the Scene Recall keySetup Mode Making settings in setup modeDetails of the setup menu Foot Switch setting Display Foot Sw ? Fader Fix setting Display FaderFix ?Channel fader recall setting Display ChFdrRcl ? Master fader recall setting Display MsFdrRcl ?AUX Send 1/2 SpecificationsInput 1 ~ Input 5/6 ~ 7/8Declaration of EC Directive
Top Page Image Contents