Fostex VM08 Trim knob, Input jacks, Contrast adjusting knob, LCD display, Scene number display

Page 5

8. TRIM knob

Input gain is adjusted with this TRIM knob for each sound source connected to input jacks 1 ~ 4. The input level is adjustable over a wide range from line level down to mic level.

9. INPUT jacks

External sound sources are input here.

INPUTS 1 ~ 4 comply to mic/line and input gain can be adjusted with the TRIM knob. INPUT's 5/6 and 7/8 are exclusively for line level signals.

10. Contrast adjusting knob

The LCD display contrast is adjusted with this knob.

11. LCD display

Various figures are displayed here. Refer to [Ini- tial state of VM08] in page 11 for details.

12. Scene number display

The current scene number is displayed here. Refer to [Scene memory mode] on page 24 for de- tails.

13. Status indicator

Using the channel parameter edit mode explained later, what is currently setup can be confirmed by the dot display. Items to be set can be selected with the PAN/EQ key or the EFF/AUX key. Refer to [Channel parameter edit mode] on page 14 for details.

14. Scene Recall key

This is pressed to recall the scene memory ex- plained later. Refer to [Recall of the scene memory] on page 24 for details.

15. Scene Store key

This is pressed to store a scene memory. Refer to [Storing the scene memory] on page 24 for de- tails.

16. Effect 2 key

This is pressed to select the EFF 2 effects type or the parameter to be edited. Also, if this key is pressed while pressing the EXIT key, muting of EFF 2 can be switched ON/OFF. Refer to [Effect edit mode] on page 18 for details.

17. Effect 1 key

This is pressed to select the EFF 1 effects type or the parameter to be edited. Also, if this key is pressed while pressing the EXIT key, muting of EFF 1 can be switched ON/OFF. Refer to [Effect edit mode] on page 18 for details.

18. Enter key

This is used to accept the current mode setting. This key will setup scene memory (page 24), the setup mode (page 27) and also the setup of ef- fects type (page 18). Please refer to their respec- tive explanation for details.

19. Exit key

This is used to exit from all modes but the normal mix mode. This key works for the channel param- eter edit mode (page 14), the effects edit mode

Model VM08 Owner’s Manual

(page 18), the scene memory mode (page 24) and the setup mode (page 27). Refer to their respec- tive explanation for details.

20. Data encoder

This dial is rotated to make settings such as setup of PAN and EQ. This dial works in the channel parameter edit mode (page 14), the scene memory mode (page 24) and the effects edit mode (page 18). Refer to their respective explanations for details.

21. Master fader

This adjusts the master level of signal output from the STEREO OUT L, R jacks and S/P DIF OUT.

22. Input fader

Signal levels of sound sources connected to each INPUT jack can be adjusted with these faders. In- put faders 5/6 and 7/8 controls both channels at the same time.

23. EFF/AUX select key

The channel parameter edit mode is entered when this key is pressed and EFFECT send output and AUX send output can be adjusted. Refer to [Chan- nel parameter edit mode] on page 14 for details.

24. PAN/EQ select key

The channel parameter edit mode is entered when this key is pressed to setup of PAN and EQ. Refer to [Channel parameter edit mode] on page 14 for details.

25. Fader adjust key

This key warns by blinking if a fader position drifts or sound volume is accidentally changed at switch ON of power or at recall of the scene memory. Use this key to enter the fader adjust mode to manu- ally adjust the fader position. Refer to [Fader ad- just mode] on page 25 for details.

26. Level adjust key

This key will blink together with of the FADER ADJUST key. The level adjust mode is entered when this key is pressed so the sound level can be matched to the present fader position. Refer to [Level adjust mode] on page 25 for details.

27. Channel On/Channel Select key

The channel to be edited can be selected while in the channel parameter edit mode. In other modes, channel ON/OFF is possible. Refer to [Normal mix mode] on page 12 and [Channel parameter edit mode] on page 14 for details.

28. Headphone volume

This adjusts the monitor headphone sound vol- ume.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Model Safety Instructions Table of Contents Names and Functions Status indicator Contrast adjusting knobFader adjust key Level adjust keyInternal battery for the memory back up Reset of VM08Remove the insulation paper Please remember thisST.OUT L, R jack Peripheral Equipment ConnectionInput 1 ~ 4 jacks Input 5/6 Input 7/8 jacksAUX Send OUT 1/2 jack Input 5/6 7/8 and AUX Send 1/2 jacksInput 5/6, Input 7/8 jacks Example-2 To use as a Mono IN/STEREO OUT effects Application ExampleExample-3 For use as a sub-mixer for a live keyboard player Example-4 To use as a small facility mixerExample-6 To produce original Remix Example-5 For one take live studio recordingExample-7 To do you own Sound Track Video Editing Example-8 As a practice aid for your musical instrumentsVM08 Initial State Useful information Normal Mix ModeCharacter display section Master fader display sectionSetting before switch off of power To return to the setting before switching off powerMute of the various input channel/master output To set to the present fader positionNumber is adjusted with the Data encoder Channel Parameter Edit ModeSetup method for PAN setting Setup method of the Effect Send level Setup method for EQ settingExample Character display section when LO is made to light Number is set with the Data encoderExample The character display section with light up A1 Setup method of the AUX Send levelExample Character section when E1 is lit Example The character display section with E1 is lit PRE/POST setup method for Effect SEND/AUX SendP. Fostex Advanced Signal Processing Technology Effect Edit ModeAbout the effect types Effect types preset for EFFWhen the EFF 2 key is pressed When the EFF 1 key is pressedSelecting the effect type Use the Data encoder to select the effect typeTo cancel muting Effect parameter settingsMuting an effect To mute the effect soundEffect parameter details Doubling effect parameters parameter type Doubling Delay pitch effect parameters parameter type Delay PitchChorus effect parameters parameter type Chorus Flanger effect parameters parameter type FlangeStoring a scene memory Scene Memory ModeRecalling a scene memory Press the Scene Store keyFader adjust Level adjustPress the Level Adjust key Press the Fader Adjust keyClearing a scene memory Directly recalling a scene memoryHold down the Exit key and press the Scene Recall key Press the EFF 1 key or EFF 2 keyDetails of the setup menu Setup ModeMaking settings in setup mode Channel fader recall setting Display ChFdrRcl ? Fader Fix setting Display FaderFix ?Master fader recall setting Display MsFdrRcl ? Foot Switch setting Display Foot Sw ?Input 1 ~ SpecificationsInput 5/6 ~ 7/8 AUX Send 1/2Declaration of EC Directive
Top Page Image Contents