Fostex VM08 owner manual Scene Memory Mode, Storing a scene memory, Recalling a scene memory

Page 24

Model VM08 Owner’s Manual

Scene Memory Mode

The VM08 provides 21 scene memories (scene numbers 00--20).

Of these, scene number [00] is a preset scene named "Initial Mix," and cannot be modified by the user. Your own settings can be stored in scene numbers [01]--[20]. Each scene stores the contents of Normal Mix mode, Channel Parameter Edit mode, and Effect Edit mode as a set.

An eight-character alphanumeric name can be assigned to each scene memory you store.

Storing a scene memory

Here's how to store the current mix data as a scene memory.

1.Press the SCENE STORE key.

The number and name of the currently selected

scene will blink.

Blinking

Lit

< Note >

If you select scene number [00] and attempt to store, the display will indicate [Read Only], and the operation will be ignored.

2.Rotate the DATA encoder to select the scene number [01]--[20] into which you wish to store the settings.

3.Press the ENTER key.

The store destination scene number will be finalized, and you will now be able to input the scene name. The current scene name will be dis played.

Blinking

Lit

Lit

4.Use the DATA encoder and cursor keys (EFF 1 key / EFF 2 key) to input the scene name.

A scene name of up to eight characters can be assigned, using the following characters and symbols.

A ~ Z a ~ z 0 ~ 9 + - * / # & ! ? ( ) [ ]

<> : . , <- -> _

5.When you have finished entering the scene name, press the ENTER key.

<Useful Information!>

The scene memories you store are preserved even when the power is turned off. However if you reset the VM08 (by pressing the RESET key), all scene memories other than scene num- ber [00] will return to the initial state.

If you decide to halt the process during the scene memory store procedure, press the EXIT key. From any point in the procedure, this will return you to Normal Mix mode.

Recalling a scene memory

Here's how to recall a previously-stored scene memory.

1. Press the SCENE RECALL key.	Blinking	Blinking	Lit
1. Press the SCENE RECALL key.

The scene number and scene name will blink.

24

Image 24

Contents Model Safety Instructions Table of Contents Names and Functions Contrast adjusting knob Status indicatorFader adjust key Level adjust keyReset of VM08 Internal battery for the memory back upRemove the insulation paper Please remember thisPeripheral Equipment Connection ST.OUT L, R jackInput 1 ~ 4 jacks Input 5/6 Input 7/8 jacksInput 5/6 7/8 and AUX Send 1/2 jacks Input 5/6, Input 7/8 jacksAUX Send OUT 1/2 jack Application Example Example-2 To use as a Mono IN/STEREO OUT effectsExample-3 For use as a sub-mixer for a live keyboard player Example-4 To use as a small facility mixerExample-5 For one take live studio recording Example-6 To produce original RemixExample-7 To do you own Sound Track Video Editing Example-8 As a practice aid for your musical instrumentsVM08 Initial State Normal Mix Mode Useful informationCharacter display section Master fader display sectionTo return to the setting before switching off power Setting before switch off of powerMute of the various input channel/master output To set to the present fader positionChannel Parameter Edit Mode Setup method for PAN settingNumber is adjusted with the Data encoder Setup method for EQ setting Setup method of the Effect Send levelExample Character display section when LO is made to light Number is set with the Data encoderSetup method of the AUX Send level Example Character section when E1 is litExample The character display section with light up A1 PRE/POST setup method for Effect SEND/AUX Send Example The character display section with E1 is litEffect Edit Mode P. Fostex Advanced Signal Processing TechnologyEffect types preset for EFF About the effect typesWhen the EFF 1 key is pressed When the EFF 2 key is pressedSelecting the effect type Use the Data encoder to select the effect typeEffect parameter settings To cancel mutingMuting an effect To mute the effect soundEffect parameter details Delay pitch effect parameters parameter type Delay Pitch Doubling effect parameters parameter type DoublingChorus effect parameters parameter type Chorus Flanger effect parameters parameter type FlangeScene Memory Mode Storing a scene memoryRecalling a scene memory Press the Scene Store keyLevel adjust Fader adjustPress the Level Adjust key Press the Fader Adjust keyDirectly recalling a scene memory Clearing a scene memoryHold down the Exit key and press the Scene Recall key Press the EFF 1 key or EFF 2 keySetup Mode Making settings in setup modeDetails of the setup menu Fader Fix setting Display FaderFix ? Channel fader recall setting Display ChFdrRcl ?Master fader recall setting Display MsFdrRcl ? Foot Switch setting Display Foot Sw ?Specifications Input 1 ~Input 5/6 ~ 7/8 AUX Send 1/2Declaration of EC Directive