Fostex VM08 owner manual Effect parameter settings, Muting an effect, To mute the effect sound

Page 21

3.Press the [ENTER] key.

The effect type will be finalized, and the parameter setting screen will appear.

The default (initial) parameter values will be displayed.

Model VM08 Owner’s Manual

Details on the parameters are given

in the fol-

lowing section, "Parameter settings."

 

4.To exit Effect Edit mode, press the EXIT key twice in succession.

You will return to Normal Mix mode.

<Note >

When you press the ENTER key to finalize the effect type, the sound will be muted for an instant.

Effect parameter settings

Here's how to set the effect parameters.

1.If the effect parameter that you wish to adjust is not displayed, press the EFF 1 key (or the EFF 2 key) twice.

One of the parameters of that effect type will appear.

2.Press the EFF 1 key (or the EFF 2 key) several times to display the desired parameter.

The parameters that appear will differ, depending on the effect type that is selected.

3.Use the DATA encoder to adjust the value.

For details on the meaning and range of each parameter, refer to "Effect parameter details" on the next page.

4.If you wish to adjust another parameter, repeat from <step 2>.

5.When you are finished making settings, press the EXIT key twice to exit Effect Edit mode.

<Useful Information!>

The parameter display will change as you re- peatedly press the EFF 1 (or EFF 2) key. If you hold down the key for a certain length of time, the parameter display will go back to the previ- ous screen.

<Useful Information!>

When the effect parameter being edited is "Delay Time" or "BPM," you can also use the ENTER key or a foot switch to make the setting by tapping, as an alternative to using the DATA encoder.

In order to use the foot switch for tap input, you need to make settings in the Setup mode "Foot switch function setting" menu. For details refer to p.27 "Setup mode."

< Note for tap input using the ENTER key / foot switch >

When tap input is used, the value will be finalized on the fourth tap. This means that you must tap four times or more.

Muting an effect

You can mute the effect sound of effect 1 or effect 2.

To mute the effect sound:

Hold down the EXIT key and press the EFF 1 key (or EFF 2 key).

The effect sound of effect 1 or effect 2 will be muted, and the dry sound will be heard.

When muting is on, the EFF 1 key (or EFF 2 key) LED will blink.

To cancel muting:

Once again hold down the EXIT key and press the EFF 1 key (or EFF 2 key).

The dry sound will change back to the effect sound. When mute is turned off, the EFF 1 key (or EFF 2 key) LED is off.

<Useful Information!>

Effect muting can also be switched on/off by a foot switch (separately sold) as an alternative to the above procedure.

The foot switch can be used to switch muting on/off for effect 1 or effect 2, or can simultaneously mute both effect 1 and effect 2. For details refer to p.27 "Setup mode."

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Model Safety Instructions Table of Contents Names and Functions Status indicator Contrast adjusting knobFader adjust key Level adjust keyInternal battery for the memory back up Reset of VM08Remove the insulation paper Please remember thisST.OUT L, R jack Peripheral Equipment ConnectionInput 1 ~ 4 jacks Input 5/6 Input 7/8 jacksInput 5/6 7/8 and AUX Send 1/2 jacks Input 5/6, Input 7/8 jacksAUX Send OUT 1/2 jack Example-2 To use as a Mono IN/STEREO OUT effects Application ExampleExample-3 For use as a sub-mixer for a live keyboard player Example-4 To use as a small facility mixerExample-6 To produce original Remix Example-5 For one take live studio recordingExample-7 To do you own Sound Track Video Editing Example-8 As a practice aid for your musical instrumentsVM08 Initial State Useful information Normal Mix ModeCharacter display section Master fader display sectionSetting before switch off of power To return to the setting before switching off powerMute of the various input channel/master output To set to the present fader positionChannel Parameter Edit Mode Setup method for PAN settingNumber is adjusted with the Data encoder Setup method of the Effect Send level Setup method for EQ settingExample Character display section when LO is made to light Number is set with the Data encoderSetup method of the AUX Send level Example Character section when E1 is litExample The character display section with light up A1 Example The character display section with E1 is lit PRE/POST setup method for Effect SEND/AUX SendP. Fostex Advanced Signal Processing Technology Effect Edit ModeAbout the effect types Effect types preset for EFFWhen the EFF 2 key is pressed When the EFF 1 key is pressedSelecting the effect type Use the Data encoder to select the effect typeTo cancel muting Effect parameter settingsMuting an effect To mute the effect soundEffect parameter details Doubling effect parameters parameter type Doubling Delay pitch effect parameters parameter type Delay PitchChorus effect parameters parameter type Chorus Flanger effect parameters parameter type FlangeStoring a scene memory Scene Memory ModeRecalling a scene memory Press the Scene Store keyFader adjust Level adjustPress the Level Adjust key Press the Fader Adjust keyClearing a scene memory Directly recalling a scene memoryHold down the Exit key and press the Scene Recall key Press the EFF 1 key or EFF 2 keySetup Mode Making settings in setup modeDetails of the setup menu Channel fader recall setting Display ChFdrRcl ? Fader Fix setting Display FaderFix ?Master fader recall setting Display MsFdrRcl ? Foot Switch setting Display Foot Sw ?Input 1 ~ SpecificationsInput 5/6 ~ 7/8 AUX Send 1/2Declaration of EC Directive
Top Page Image Contents