Fostex VM08 owner manual Names and Functions

Page 4

Model VM08 Owner’s Manual

Names and Functions

2

3

4

5

6

7

1

1

2

9V

AD-9B

ONLY

OUTRESET

DC IN

S/P DIF

FOOT SW

AUX SEND

	7		5
8/7	8	6/5	6

				R	ST OUT	L		PHONES
4	TRIM	3		2			1	8
4	TRIM	3	TRIM	2	TRIM		1	TRIM
	-10 -50		-10 -50		-10	-50		-10 -50
		INPUT

		9
10	11	12	13
				14
28		EQ		15
28
27				16
27				17
				17
26				18
25				19
24
23
		22	21	20

1. AC adaptor connector

Connect the AC adaptor, included in the acces- sory kit, to a wall AC socket and plug the adaptor output cable to this jack (Be sure to use the adap- tor included in the VM08 package).

2. S/P DIF optical output connector

The same signal output from the ST OUT L/R jack is output here as digital audio signal in the S/P DIF format.

3. Foot switch connecting jack

A foot switch (Fostex Model 8051) is plugged in here. The foot switch function can be changed by the [SETUP mode] explained later. The initial set- ting recalls the scene memory. Refer to page 27 for details.

4. RESET switch

This switch resets the CPU inside VM08. Refer to page 6 for details.

5. AUX send jack

AUX SEND level signals, adjusted in the channel parameter edit mode, are output here. Refer to pages 8 and 17 for details.

6. STEREO OUT L, R jack

The mixed signal is output to the MTR, stereo moni- tor system or to other mixers. Output level is ad- justed by the MASTER fader.

7. Headphone jack

The monitoring headphone is connected here. Use the PHONES control to adjust the sound level.

4

Image 4

Contents Model Safety Instructions Table of Contents Names and Functions Contrast adjusting knob Status indicatorFader adjust key Level adjust keyReset of VM08 Internal battery for the memory back upRemove the insulation paper Please remember thisPeripheral Equipment Connection ST.OUT L, R jackInput 1 ~ 4 jacks Input 5/6 Input 7/8 jacksInput 5/6, Input 7/8 jacks Input 5/6 7/8 and AUX Send 1/2 jacksAUX Send OUT 1/2 jack Application Example Example-2 To use as a Mono IN/STEREO OUT effectsExample-3 For use as a sub-mixer for a live keyboard player Example-4 To use as a small facility mixerExample-5 For one take live studio recording Example-6 To produce original RemixExample-7 To do you own Sound Track Video Editing Example-8 As a practice aid for your musical instrumentsVM08 Initial State Normal Mix Mode Useful informationCharacter display section Master fader display sectionTo return to the setting before switching off power Setting before switch off of powerMute of the various input channel/master output To set to the present fader positionSetup method for PAN setting Channel Parameter Edit ModeNumber is adjusted with the Data encoder Setup method for EQ setting Setup method of the Effect Send levelExample Character display section when LO is made to light Number is set with the Data encoderExample Character section when E1 is lit Setup method of the AUX Send levelExample The character display section with light up A1 PRE/POST setup method for Effect SEND/AUX Send Example The character display section with E1 is litEffect Edit Mode P. Fostex Advanced Signal Processing TechnologyEffect types preset for EFF About the effect typesWhen the EFF 1 key is pressed When the EFF 2 key is pressedSelecting the effect type Use the Data encoder to select the effect typeEffect parameter settings To cancel mutingMuting an effect To mute the effect soundEffect parameter details Delay pitch effect parameters parameter type Delay Pitch Doubling effect parameters parameter type DoublingChorus effect parameters parameter type Chorus Flanger effect parameters parameter type FlangeScene Memory Mode Storing a scene memoryRecalling a scene memory Press the Scene Store keyLevel adjust Fader adjustPress the Level Adjust key Press the Fader Adjust keyDirectly recalling a scene memory Clearing a scene memoryHold down the Exit key and press the Scene Recall key Press the EFF 1 key or EFF 2 keyMaking settings in setup mode Setup ModeDetails of the setup menu Fader Fix setting Display FaderFix ? Channel fader recall setting Display ChFdrRcl ?Master fader recall setting Display MsFdrRcl ? Foot Switch setting Display Foot Sw ?Specifications Input 1 ~Input 5/6 ~ 7/8 AUX Send 1/2Declaration of EC Directive