Fostex VM08 Fader Fix setting Display FaderFix ?, Channel fader recall setting Display ChFdrRcl ?

Page 28

Model VM08 Owner’s Manual

Fader Fix setting (Display: [FaderFix ?])

<Settings>

ON

OFF (default)

If this setting is turned on, the faders will no longer function in any mode.

This allows you to prevent the fader positions from being changed by accident or by vibra- tion.

Channel fader recall setting (Display: [ChFdrRcl ?])

<Settings> ON (default)

OFF

If this setting is turned off, only the input fader settings of each channel will be unaffected when you recall a scene.

In other words, the six input faders will main- tain the settings that they had immediately before the scene was recalled.

Regardless of this on/off setting, the input fad- ers will continue to function normally in all modes, as well as when you store a scene.

Master fader recall setting (Display: [MsFdrRcl ?])

<Settings> ON (default)

OFF

If this setting is turned off, the setting of the master fader will be unaffected when you re- call a scene. In other words, the master fader will maintain the setting that it had immedi- ately before the scene was recalled. This is convenient when you wish to set just the out- put level yourself, for example during a live performance.

Regardless of this on/off setting, the master fader will continue to function normally in all modes, as well as when you store a scene.

Foot Switch setting (Display: [Foot Sw ?])

Here you can specify the function of the foot switch.

 

<Settings>

 

-> SceneU/D (default)

 

-> ST Mute

 

-> EFF1 Mute

 

-> EFF2 Mute

 

-> E1&E2 Mute

 

-> Delay Tap

SceneU/D:

Access the Scene Direct Recall

 

function

 

Pressing the foot switch once

 

will enter Scene Direct Recall

 

mode; subsequent presses of the

 

foot switch will advance the

 

scene number forward, and

 

holding down the foot switch

 

will return to the previous scene

 

number.

 

To exit Direct Recall mode, press

 

the EXIT key.

ST Mute:

Switch muting on/off for the ST

 

master signal

EFF1 Mute:

Switch muting on/off for EFF 1

EFF2 Mute:

Switch muting on/off for EFF 2

E1&E2 Mute: Switch muting on/off for EFF 1

 

/ EFF 2.

Delay Tap:

When editing effect parameters,

 

use the foot switch for tap in

 

put of Delay Time or BPM.

Battery check (Display: [BattVolt ?])

This lets you check the voltage of the internal battery. After selecting this menu item, press the ENTER key. The voltage of the internal bat- tery will be displayed, allowing you to check it. When you have checked the voltage, press the EXIT key to exit Setup mode.

The life of the internal battery is approximately two years. When the battery runs down and the voltage decreases to a certain level, a warn- ing message of [Batt Empty] will appear in the display when the VM08 is powered-on. It is not possible for the user to replace the internal battery. Please contact a nearby Fostex office or service station. For details on the [Batt Empty] message, refer to page 6 "Before Op- eration."

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Model Safety Instructions Table of Contents Names and Functions Contrast adjusting knob Status indicatorFader adjust key Level adjust keyReset of VM08 Internal battery for the memory back upRemove the insulation paper Please remember thisPeripheral Equipment Connection ST.OUT L, R jackInput 1 ~ 4 jacks Input 5/6 Input 7/8 jacksInput 5/6, Input 7/8 jacks Input 5/6 7/8 and AUX Send 1/2 jacksAUX Send OUT 1/2 jack Application Example Example-2 To use as a Mono IN/STEREO OUT effectsExample-3 For use as a sub-mixer for a live keyboard player Example-4 To use as a small facility mixerExample-5 For one take live studio recording Example-6 To produce original RemixExample-7 To do you own Sound Track Video Editing Example-8 As a practice aid for your musical instrumentsVM08 Initial State Normal Mix Mode Useful informationCharacter display section Master fader display sectionTo return to the setting before switching off power Setting before switch off of powerMute of the various input channel/master output To set to the present fader positionSetup method for PAN setting Channel Parameter Edit ModeNumber is adjusted with the Data encoder Setup method for EQ setting Setup method of the Effect Send levelExample Character display section when LO is made to light Number is set with the Data encoderExample Character section when E1 is lit Setup method of the AUX Send levelExample The character display section with light up A1 PRE/POST setup method for Effect SEND/AUX Send Example The character display section with E1 is litEffect Edit Mode P. Fostex Advanced Signal Processing TechnologyEffect types preset for EFF About the effect typesWhen the EFF 1 key is pressed When the EFF 2 key is pressedSelecting the effect type Use the Data encoder to select the effect typeEffect parameter settings To cancel mutingMuting an effect To mute the effect soundEffect parameter details Delay pitch effect parameters parameter type Delay Pitch Doubling effect parameters parameter type DoublingChorus effect parameters parameter type Chorus Flanger effect parameters parameter type FlangeScene Memory Mode Storing a scene memoryRecalling a scene memory Press the Scene Store keyLevel adjust Fader adjustPress the Level Adjust key Press the Fader Adjust keyDirectly recalling a scene memory Clearing a scene memoryHold down the Exit key and press the Scene Recall key Press the EFF 1 key or EFF 2 keyMaking settings in setup mode Setup ModeDetails of the setup menu Fader Fix setting Display FaderFix ? Channel fader recall setting Display ChFdrRcl ?Master fader recall setting Display MsFdrRcl ? Foot Switch setting Display Foot Sw ?Specifications Input 1 ~Input 5/6 ~ 7/8 AUX Send 1/2Declaration of EC Directive
Top Page Image Contents