Korg D3200 2b. PAIR/GROUP, 102, 2b-1. Channel Pair, 2b-2. Fader Group, 2b-3. Channel On Group

2b. PAIR/GROUP

2b-1. Channel Pair

Here you can specify pairing for adjacent mixer channels. For paired channels, the following parameters will operate in tandem and will have the same values for each channel.

Fader, Pan, CH ON, PlayEQ, RecEQ, RecSend, Eff 1/2 Send, Aux 1/2 Send, ATT, REC/PLAY, Group

					1
						2
1.	Select Pair Ch			[1 2…31 32]
	Click the 1 2–31 32 buttons to select the channels that
	are paired (the heart icon		will be displayed for paired
	channels).
2.	PanMode		[Indiv, Sync, Cross, Balance]
	Select how panning will occur.
	Indiv:	The pan of the two channels will operate inde-
		pendently.
	Sync:	The pan of both channels will be the same value.
	Cross:	The two channels will have the opposite pan val-
		ue.

Balance: The pan control will function as channel balance.

Operation when tracks 1 and 2 are paired

IndivSyncCross

1 2 1 2 1 2

Pan 1 and 2 can be				Sync If pan 1 is	Cross If pan 1 is
set independently.				R63, pan 2 will also	L63, pan 2 will be
Balance				be R63.	R63.
			Balance Pan knob 1 operates
			as the Balance knob.
			Pan knob 2 has no effect.
	1	2

2b-2. Fader Group

When you operate the fader of any channel that is assigned to a group, the other faders assigned to that group will also move, preserving the balance of the linked channels.

There are four groups, A through D. Each channel can be as- signed to only one of these Fader groups.

1

2

1. Group buttons [A, B, C, D]

These buttons select the fader group for each channel. To select the group, click the corresponding button (it will be highlighted).

Use the scroll bar/button to move the range of channels that is displayed.

2. Group on buttons [A, B, C, D]

Click (highlight) this if you want to enable a fader group. If a button is clicked (highlighted), the fader levels will maintain the balance between channels as they are adjusted.

When you turn on a 1. “Group button” to add a channel to an existing fader group, the level of the channel at that moment will be set as that fader’s balance in the group.

2b-3. Channel On Group

When you turn on the CH ON key of a channel that has been assigned to a Channel On group, other channels assigned to that group will also be turned on. There are four Channel On groups; E through H. Each channel can belong to no more than one of these Channel On groups.

1

2

1. Group buttons [E, F, G, H]

These buttons select the CH ON group for each channel. To select the group, click the corresponding button (it will be highlighted).

Use the scroll bar/button to move the range of channels that is displayed.

2. Group on buttons [E, F, G, H]

To enable CH ON grouping, click the corresponding but- ton (highlighted). If these buttons are clicked, the faders will move to preserve the balance of the group when you operate any fader in that group.

When you turn on a 1. “Group button” to add a channel to an existing Channel On group, the on/off status of the channel at that moment will determine the on/off status for the group.

102