Basic operation, Selecting the page mode

Basic operation

1.Selecting the page mode

If you want to edit a setting or function while watching it in the LCD screen, you’ll need to press a key to access the page mode that contains that function. The MIXER key and CD key will display a page jump menu in the LCD screen; click the page mode buttons shown in the LCD screen to select the desired mode. Each time you press the MIXER key or CD key, you will return to this page jump menu.

For details on the functions of each page mode, refer to “Reference” (→p.98–).

2.Selecting a tab page

The numerous parameters contained in each page mode are in turn divided into tabs. Use the TAB PAGE keys of the edit controller to select a tab page. You can also move to a tab page by clicking its tab in the LCD screen. Some pages contain only one tab.

3.Selecting and setting parameters

Selecting a parameter

To select a parameter, click the edit icon, edit cell, or button shown in the LCD screen.

In most cases, you can use the cursor keys to move between parameters and press the ENTER key to select one.

You cannot use the cursor keys to move between a dialog box and the original tab page.

Setting a parameter

There are different methods of setting a parameter, depending on the type of parameter.

Edit icons, edit cells, buttons

Click the edit icon, edit cell, or button in the LCD screen to highlight it, and

then turn the value dial (or use the +/– keys) to set the value. If buttons are displayed in the LCD screen, you can click these buttons as well.

Popup buttons, dialog boxes

Click the popup button in the LCD screen to access the dialog box, and then select the parameter value in the LCD screen. You can also use the value dial (or +/– keys) to select the parameter value.

Toggle buttons

Toggle buttons in the LCD screen will alternate between on and off each time you press them. You can also use the cursor keys to highlight the button and then press the ENTER key to switch the function on and off.

Radio buttons

Click a button in the LCD screen to select it. In addition, you can use the cur- sor keys to highlight the button and then press the ENTER key to select it.

Selecting one item from a menu list

•Click the desired item from the list shown in the LCD screen to select it.

•Click the buttons in the LCD screen to move the highlighted area.

•Use the value dial or +/– keys to make your selection.

Fader or pan settings

You can adjust the fader of each channel independently. To adjust the pan, press the PAN key to access the “FADER PAN” tab page, and use the Knob Matrix.

Introduction

	using the D3200	the first time
	using the D3200	the first time
	Before	for
	Main features
	Main features
	Parts and their function




	and functions in the	LCD screen
	Items

	Basic operation