Korg D3200 owner manual 115, Master EFF1, Effect program selection

10.Rename

This lets you rename the effect program.

Select the effect program that you want to rename, click the Rename button to open the dialog box, and edit the

name. You can assign a name of up to sixteen characters (→p.99).

After renaming the program, use “11. Store” to store it. The effect program name you edited will be discarded if you don’t use to store it.

11.Store

This stores the effect program with its edited parameters and name.

In the D3200 there are 128 user effect programs that can be used by all songs, on any song drive; and 32 song effect programs that are specific to each individual song. Click the button to display the Store Program dialog box.

Click the “Area” list button to select U (User) or S (Song). Then click the number cell and use the value dial (or +/– keys) to select the save-destination number.

When choosing the store-destination, choose “U” for programs that you intend to use in other songs as well, and choose “S” for programs that will not be used in other songs or that would cause problems if they were modified.

To execute the store operation, click the Yes button (or press the panel YES key). To cancel, click the No button (or press the panel NO key).

When you save, the new data will overwrite the data pre- viously stored in that number, and the previous settings will be lost.

If you overwrite an effect program that was being used when you stored a scene, be aware that the playback may not sound with the settings you intended.

4-3. Master EFF1

Master effects are used by adjusting the level of the signal be- ing sent from each channel to the master effect in order to cre- ate overall depth and balance.

You can use the Knob Matrix located below the LCD screen to edit the parameters that are shown as knob icons.

Notes about using the master effects

The master effects process the signals sent to them via the effect send control of each channel, and send the proc- essed signal to the effect bus. This means that the direct sound sent from each channel to the master bus will be mixed with the effect sound.

In the case of effects such as reverb or chorus that inter- nally mix the effect sound and the direct sound together before the output, the direct sound passed through the effect will be added to the direct sound sent directly from each channel, meaning that the balance between the direct and effect sound will not be correct.

In such cases, set Dry:Wet (a parameter that adjusts the balance of the effect sound and direct sound) so that the effect will output only the processed (WET) sound. With this setting, the master effect return level will correctly control the mix balance of the effect sound.

If you want to use a master effect as an insert effect, set the send location of the send channel to pre-fader (Pre) and lower the fader to -infinity so that no direct sound will be sent to the master bus. With this setting, the mix balance between the effect sound and dry sound will be controlled by the master effect parameter (Dry:Wet).

Signal flow for the master effect

from the EQ
output of each	Pan	to the Master bus
channel
			Direct sound
	Post-fader				Effect
		Master Effect		Return	sound
Pre-fader	Send	Effect	Level	Balance
		Program

In the case of Reverb Mix balance of direct

	Direct sound	Dry	Dry:Wet	sound and effect
				sound
from Send	Reverb	Wet		to Return Level
	Effect sound

1

2	6
3	7
4
	8
5		9

1.Effect program selection

To select an effect program, use the value dial, or click the popup button in the screen and choose from the list of effect programs displayed by category.

If the selected program has been edited, the program number’s P (preset), U (user), or S (song) indication will change to “E,” indicating that the program has been edited.

Counter	Rename
METER
MIXER
CH	VIEW
EFFECT
SEND
EQ
PAN
SONG
SYSTEM	/MIDI
TRACK
CD

Reference
	UNDO
	TUNER
	SESSION	DRUMS
	STORE	SCENE
	MARK
	SCRUB
	1/IN ...	4/END
	LOC	LOC
	REC/PLAY	MODE
	Transport	keys

115