Korg D3200 owner manual Examples of operation, Items

Examples of operation

You can use the sixteen control knobs of the Knob Matrix in the following tab pag- es. In pages where there are seventeen or more knob icons, you can hold down the JUMP key and use the cursor keys to switch between groups of sixteen knobs for editing.

CH VIEW page	Ch View tab page
EFFECT page	InsertEFF, MstrEFF1, MstrEFF2, and FinalEFF tab pages
SEND page	EFFSend1, EFFSend2, Aux1Send, and Aux2Send tab
	pages
EQ page	EQ/ATT and MasterEQ tab pages
FADER page	Fader Pan and Mixer View tab pages
SOLO page	CueLevel tab page
CH INPUT page	SubMix1-4, SubMix5-8, and SubMix9-12 tab pages
DRUMKIT screen

METER screen (when FaderView is selected)

Figure 1 shows the EFFECT, “MstrEFF1” tab page.

To select this tab page, press the top panel EFFECT key, and then click the “MstrEFF1” tab in the LCD screen.

In this screen, the knob icons are linked with the Knob Matrix below; you can move a knob to edit the value directly. Knobs for which no knob icon is shown have no effect.

Figure 2 is the MIXER, FADER/PAN/AUTOMATION “Fader Pan” tab page. To select this tab page, press the direct key PAN. Alternatively, you can press the MIXER key and then click the screen.

In this screen, moving the fader or Knob Matrix (corresponding to pan for each channel) of the desired channel will automatically select that channel, and change its fader or pan value.

Figure 3 is the CH VIEW, “Ch View” tab page.

To select this tab page, press the direct key CH VIEW.

You can also click the screen to select this tab page after pressing the CH VIEW key.

In this screen, the fader, EQ, and Send are controlled directly by the fader of that channel and by the Knob Matrix.

Figure 1 Figure 2 Figure 3

Introduction
	using the D3200	the first time
	Before	for
	Main features
	Parts and their function
	and functions in the	LCD screen
	Items
	Basic operation

17