Korg D3200 owner manual 144, Pattern Map

2.Parameters

You can use the drum track fader and key to turn the drum track on/off and adjust the volume.

Use the Knob Matrix to adjust the send levels and EQ set- tings. You can also click an icon in the screen and use the value dial (or +/– keys) to edit the setting.

3.Link

Click this if you want the send and EQ parameters to be the same values for L and R. If you want to set the param- eters individually for left and right, click this to turn it off, and then set the parameters individually.

4.PRE/PST

This specifies whether the sends will be taken from before the fader (pre-fader) or from after the fader (post- fader).

PRE: Send the pre-fader level

PST: Send the post-fader level

14-3. Pattern Map

Here you can edit the pattern map to add new events during song recording or playback, or change the time signature, drum pattern, or tempo.

You can specify events in the pattern map at intervals of measures.

2

3a. Start Meas [0001...9999]

Specifies the location at which the pattern map event will be created (begun, inserted), in units of measures.

3b. Length [0001...9999]

Specifies the number of measures for the pattern.

3c. GROUP, SESS, VARI, TEMPO

Use GROUP to select the group (type) of drumming pattern, SESS to select a pattern set (session) from the specified group, VARI to select a pattern variation and TEMPO to Specifies the tempo of the drumming.

3d. Blank

Click (highlight) this to select a blank pattern.

3e. Fill

Click (highlight) this to select a fill pattern.

3f. Ending

Click (highlight) this to select an ending pattern.

4.Edit

Edits the settings of a pattern map event.

Select this if you want to modify an existing event. Select (highlight) the event you want to modify, and click this but- ton to display the Edit Map Event dialog box where you can edit the parameters. (See the preceding section, 3. New)

RecMode = Pattern

1

3

4

5

6

1. Pattern map window [001...200]

Select the pattern map event that you want to edit. The list shows the event number, the starting measure and ending measure for the pattern, the time signature, the session name, the variation name, and the tempo.

2.Prev

Turn this on (highlighted) if you want to preview the pat- tern of the event that is selected in the pattern map window. This is valid only in this tab page, and will automatically be switched off when you play back the recorder or move to another page.

3.New

Creates a new pattern map event. Click this button to add a new event.

When you click this button, the New Map Event dialog box will open, and you will automatically be in Preview mode (2. Prev turned on).

You can’t add events if RecMode is set to Tempo.

RecMode = Pat&T

3a

3b

3c

3d 3e 3f

If you set the Start Meas setting later (or earlier) than the be- ginning of the selected event, the Length of the preceding event will be lengthened (or shortened) by the difference.

5.Overwr.

The settings of the pattern map event will be changed by being overwritten. Choose this if you want to add an event without changing the length of the pattern map you’ve already created. The overwritten area will be divided as a new event. Select the event you want to modify (it will be highlighted), click this button to open the Overwrite Map Event dialog box, and set the param- eters. (Refer to the preceding section, 3. New)

RecMode = Pattern

If the Start Meas and Length settings exceed the range of the event you selected, the event(s) corresponding to that portion of the map will also be overwritten. If the Start Meas and Length settings are identical to the range of the event you selected, no new event will be added; the result will be the same as 4. Edit.

6.Delete

Deletes an event from the pattern map.

In the pattern map window, select the event you want to delete and click this button to open the Delete dialog box.

144