Korg D3200 owner manual Items and functions in the LCD screen, View

Items and functions in the LCD screen

Use the ClickPoint to move the pointer (p) to a button or icon displayed in the LCD screen. Then press the center of the ClickPoint to select that button or icon. In many operations, you can use the pointer (p) to select the item or parameter to be edited or saved, such as the page, parameter value, or song name.

In this manual, references to the … button, … tab, … cell, or … icon refer to items shown in the LCD screen. Move the pointer (p) and press the center of the Click- Point to select the desired item. We’ll use the term “click” to describe this process. You can also use the cursor keys of the edit controller to move to the item you want to edit, or use the YES/NO (TAB PAGE) keys instead of the Yes (OK)/No (Cancel) buttons in the LCD screen, or use the ENTER key to confirm a setting or operation.

References to “... key,” “... knob,” “... dial,” or “... slider” indicate controls on the top panel; use the corresponding physical controller to access these items.

a: Song/counter/location/calendar display	e: Edit cell
f: Popup button

b: Page name display

d: Edit icon

c: Tab Pointer

a:Song/counter/location/calendar display

This area displays the currently selected song, the counter (song position), and the date.

This is displayed in any page mode, and you can modify the counter/calen- dar setting.

You cannot modify these settings while a dialog box is displayed.

If you haven’t set the date and time, this area is shown in gray.

b:Page name display

This indicates the name of the currently selected page, or editing information. This item does not appear in certain pages such as the effect pages or “Mixer

View.”

c:Tab

Use the pointer or the TAB PAGE keys of the edit controller to select a tab page.

d:Edit icon

When you click an icon such as a fader or knob shown in the LCD screen, a frame will appear (in most cases) around the icon. This is called the edit icon; changes you make will apply to the parameter whose icon is enclosed by the frame.

e:Edit cell

When you click a parameter in the LCD screen, the parameter value will be highlighted. This is called the edit cell; changes you make will apply to the highlighted area.

f:Popup button

When you click one of these buttons, a dialog box will appear, displaying parameters and values for you to select.

Introduction
	using the D3200	the first time
	Before	for
	Main features
	Parts and their function
	and functions in the	LCD screen
	Items
	Basic operation

13