Korg D3200 owner manual RW drive, Printing conventions in this Manual

Page 4

Cautions when using the CD-R/

RW drive

During CD reading and writing operations, keep the unit in a horizontal position.

Do not use the unit in extremely cold or hot locations.

Do not use the unit in extremely humid locations.

Do not use the unit in dusty or smoky locations.

Do not subject the unit to vibration or strong physical shock. In particular, this unit is vulnerable to shock during CD reading and writing operations.

Normally, you will be able to open the CD tray by press- ing the eject button. However if this fails, you can forcibly eject the tray by inserting a thin object (such as a straight- ened paper clip) into the emergency eject hole.

Do not store the unit in hot or humid locations.

Never touch the focusing lens.

Do not use commercially available lens cleaners.

Do not transport the unit with a disc left in the tray.

Do not leave the unit with the disc tray open.

CD-R/RW handling

Please observe the following points when handling discs. Failure to observe these points may cause problems such as data not being written correctly, loss of recorded data, or drive malfunction.

Do not leave discs in direct sunlight, or in locations of high temperature or high humidity.

Do not touch the surface of a disc. Hold a disc by its edges.

Remove dust or dirt from the surface of a disc. To remove dust, use an air duster or cleaner.

Do not affix labels to a disc, or write on a disc in locations other than specified.

Do not use chemicals or detergent to wipe a disc.

Do not bend or drop a disc.

Responsibility for loss of data

Korg Corporation will accept no responsibility for any dam- ages (direct or indirect, whether sustained by the customer or by a third party) resulting from loss of or damage to data written on a CD-R or CD-RW disc.

Printing conventions in this

manual

Faders, knobs, and keys on the panel

In this manual, “faders,” “knobs,” and “keys” refer to controls on the panel. The names shown on the panel are printed in boldface in the manual.

Examples: MASTER fader, TRIM knob, REC/PLAY key

Items in the LCD screen

“Buttons” and “dialog boxes” are displayed in the LCD screen. The names shown in the screen are printed in boldface in the manual.

Items printed in “boldface” are parameters or tab page names shown in the LCD screen.

Examples: OK button, Rename dialog box, “SetUp” tab page

Other items printed in boldface

Boldface is also used to indicate the names of non- selectable parameters shown in the LCD screen, or to indicate content in the text that we wish to emphasize.

Steps (1) (2) (3) ...

Steps in a procedure are indicated as (1) (2) (3) ...

(→p.■■)

This indicates a reference page within this manual.

, ,

These symbols respectively indicate points of caution, notes of advice, or examples.

…, “XX” tab page

This refers to a page shown in the LCD screen. To access this page, press the top panel … key, and then click the “XX” tab in the LCD screen (p.13).

You can also use the panel √TAB PAGE/TAB PAGE® keys to move between tab pages.

…, , “XX” tab page

The top panel MIXER key and CD key display a page jump menu in the LCD screen before the tab pages appear, so click the page button (p.13) and then click the “XX” tab (p.13). Pressing the MIXER key or CD key will take you back to the page jump menu screen.

LCD screens

The parameter values shown in the LCD screens printed in this manual are explanatory examples, and may not necessarily match the displays that appear on your D3200.

iv

Image 4
Contents Page Important Safety Instructions Data handling Handling of the internal hard diskIii RW drive Printing conventions in this ManualTable of Contents Effects MixerSession Drums Recorder ViiData Reference ViiiAppendices More about drives and files 171 Specifications 174Various lists 176 Before using the D3200 for the first time Power on/offPower-on Included itemsPower-off Setting the calendarPress the SYSTEM/MIDI key Click the Control tab Connection example Main features Parts and their function Functions LCD screenInput Main features Track digital multi-track recorderSession Drums Mixer scene memories, plus Midi control of mixer parametersCD-R/RW drive for creating backup disk and audio CDs What is ?Sophisticated digital editing tools Intuitive interface designed for ease-of-usePhantom power switch Parts and their functionTop panel Input 1, Input 2...INPUT 12 jacks60 -40 dBu mic input 13 1-16 key, 17-32 key 14 REC/PLAY keyCH on key Solo keyDirect keys Knob MatrixScrub key Mark keyLOOP, TRIGGER, Auto Punch indicators 37 REC/PLAY Mode keys40 HDD/CD access and Midi indicators On key, standby indicatorRear panel About the CD-R/RW drive Items and functions in the LCD screen ViewList button Scroll bar/scroll buttonsConfirmation button Radio buttonsSelecting and setting parameters Selecting the page modeBasic operation Switching between channels 1-16 Send and equalizerEditing effects Selecting a channelExamples of operation Connections Turn the D3200 onPlease note the following items before you begin ConnectionsWhen the demo song ends, press the Stop key Adjust the mixListen to the demo song Press the Song key to access the Song Create a new songName the song Create the songConnect your audio sources to the mixer inputs Connect mics and instruments to the Input jacksConfirm the changes Connect a guitar to the guitar inputAssign the inputs to channels Press the EQ key to access the EQ/ATT tab Choose a channel Use the Knob Matrix to adjust the EQAdjust the EQ settings of channel Adding EQ and EffectsReverb&Delay in the Mono Applying effects to the input soundChoose an effect type Choose an effect programSetting the recording mode RecordingPreparations for recording Normal Select the recording statusPlayback Start recordingOverdubbing Arm track 2 for recordingApplying effects and EQ to individual channels Press the EQ key to access the EQ/ATT tabApplying EQ to each channel/track Adjusting the pan Selecting a master effectSelect a track for EQ Select an effect programAdjusting the Master Effect 1 Send amount for each track Checking and adjusting the master effectAdjust the send amount of each track Adjust the return form the master effectsMake the desired adjustments, and then press the Stop key Set the meters to display the post fader levelsApplying an effect to the master bus Final Effect Choose a final effectWhen you‘re done adjusting the master EQ, press the Stop key Applying EQ to the master bus Master EQAdjust the recording level Recording the master trackSpecify a virtual track Arm the master track for recordingWriting to a CD Saving your songSelecting/creating a song Creating a new songUsing the name library Renaming a songSelecting a song Selecting a song from the song listSwitching the counter display Switching the information display areaLocation Mixer Effects Session Drums RecorderMoving to a different location Using the Mark keys to move Moving to the location assigned to a markDeleting a mark Session Drums RecorderFinding a zero-cross point Finding a precise location ScrubPress the Scrub key to display the Scrub Song editing procedure Song editingCopying a song Moving a songInputting audio to the mixer Analog inputProtecting a song Saving a songUsing the tuner Inputting the digital audio signal from a MD or DAT Audio outputs from the mixerDigital input Sub inputMixer settings Adjusting the volumeAdjusting the pan EQ EqualizerPairing EQ library Storing and recall- ing EQ settingsMaster EQ Group settings Monitor settingsFader groups CH on groupsSolo settings Adjusting the cue levelMuting a channel Storing a mixer setup Mixer SetupClick the Yes button or press the panel YES key to save Storing/recalling a scene Storing a sceneRecalling a scene Renaming a sceneSpecifying parameters that will be disabled for all scenes Editing and overwriting a sceneControlling scenes via Midi Midi outputScene automation AutomationEvent automation When you play back the song, event recording will begin Playing back the eventsEditing events Turn Automation on RecNumber of effects and DSP power for each variety of effect How DSP power is allocated to the effectsEffect type and size Using insert effects Using master effectsUsing the final effect Applying insert effects during recordingEditing the effects Editing the effect parametersStoring an effect program For an insert effectUsing external effects Using a pedal or Midi to control an effectControlling effects from an external device Select the effect that you want to controlListening to drum patterns Creating a drum track for an entire song Pattern MapIf you’ve selected Metronome as the group D3200 contains 756 drum patterns →p.176 Drum Pat- tern ListRecording with Session Drums Recording additional tracks as you listen to the drum trackRecording patterns on a track Auditioning the pattern mapEditing a drum kit Selecting a drum kitRecording directly to the master track Editing the sound of a drum kitPattern maps Creating a pattern mapTurn the Click Monitor button off normal display List, select highlightTempo Editing a pattern mapTempo track Song Guide functionChanging the tempo during the song Tap tempoRecording Pattern map tempoBasic recording Bounce recordingSwitching virtual tracks Trigger recordingManual punch-in/out Using a foot switch for manual punch-in/outAuto punch-in/out Loop recording Creating a master trackSong Locate Mixer Effects Session Drums Normal playback PlaybackLoop playback Track editing procedures Track editingPlaying back an album CD project Copy a track CopyTrkUsing the clipboard to copy data to another song Insert blank space InsertTrk Erase a track EraseTrk Delete a track DeleteTrkDeleting track data Deleting all data of a trackExchange tracks SwapTrk Reverse a track ReverseTrkOptimizing a track OptimizeTrk Expand/compress a track ExpCmpTrkSelect the expansion/compression mode Copying to a virtual trackSelect the copy-source virtual track Verify the copy-destinationExchange two entire tracks SwapWholeTrk Fade-in/fade-out FadeTrkSwapping entire tracks Creating a fade-inCreating a fade-out Specify the region where you want to erase punch Noise Eliminating noise NoiseReductionErasing punch noise ErasePunchNoise Select NoiseReductionTrack At Once Naming a trackErase a silent region EraseSilence Disc At Once Album CD ProjectWrite the song Finalize the discSong Locate Mixer Effects Session Drums Recorder Specify the size of the gaps between each trackAudition the Album CD Project Check the CD by playing it back on an audio CD playerRipping a CD Creating a live CDCreate a master track for this song Edit the album CD project. Figure EBacking up Backing up and restoringBacking up 1 Song Execute the backup When backing up to CD-R/RWWhen backing up to the PC drive Backing up All DataRestoring backed-up data Importing an audio file Audio filesImporting an audio track into the beginning of a track Importing an audio file into the middle of a track Exporting an audio fileExporting an audio file Using D32XD and D16XD data Using D3200 data on a different modelUsing data from a different model on the D3200 Drive and data compatibility with the Digital RecordingSpecifying the drive size Specifying the PC drive sizeChecking the hard disk Renaming a song driveFormatting the hard disk Creating a system recovery To keep only the audio data that you are actually usingLoad system Drive capacityPC drive Checking, renaming, or deleting filesDeleting the Undo data Sharing event dataWindows users Windows Me/2000 or later Saving/loadingMacintosh users Mac OS9.0.4 or later Midi connections Using MidiMidi messages used by D3200 Using Midi to control the mixer Synchronizing two D3200 unitsDownloading the operating system Upgrading the systemClickPoint Calibration dialog box will appear Press the panel Enter keyCounter display CounterTime Disp Type dialog box Using the name library RenameEditing a name Meter/Track View100 2a. CH INPUT/SubMixer 1012b. PAIR/GROUP 1022b-1. Channel Pair 2b-2. Fader Group2c. FADER/PAN/AUTOMATION 1032c-1. Fader Pan 2c-2. Automation104 2c-3. Event List105 2c-4. Edit Scene2c-5. Scene Filter 1062c-6. Mixer View 2d. EQ/ATT/PHASE 1072d-1. EQ/ATT 2d-2. EQ Library108 2d-3. Phase2d-4. Master EQ 2e. Send EFF/AUX/REC 1092f. SOLO/MONITOR 1102e-5. Rec Send 2f-1. Solo2g. Mixer Setup 1112f-2. Monitor 2f-3. Cue Level112 Ch ViewChannel Routing View 3a. Rename113 Effect Routing114 Insert EFFEffects that can be used simultaneously Techniques for assigning effectsMaster EFF1 115Effect program selection PAN 116Master EFF2 Final EFF117 118 119 Disk Utility 120HDD, CD 121 122 Edit PC FileRestore Backup123 Restore destination 124Album CD Project Other data files125 126 Virtual TrackMaster Track Edit Track127 CopyTrk128 Wave dialog box129 InsertTrkEraseTrk DeleteTrk130 SwapTrkReverseTrk A3.WAVE131 OptimizeTrkExpCmpTrk A4. Wave132 CopyWholeTrkSwapWholeTrk A3. VirtualA3. Mode 133FadeTrk NormalizeTrk134 NoiseReductionErasePunchNoise Before execution After executionImport File 135EraseSilence 136 Export File11. CD 13711a. Album CD 13811b. Track at once 139140 11c. CD PlayerWAV 141 UndoCalib 142 143 Drums Track Mixer144 Pattern Map145 MarkTempo Track 146 ZoomRec Mode LOC 1/IN, … LOC 4/ENDMixer Navigation Tools 147148 Transport keys Play/Stop Mode149 Category Reverb&Delay 150Category Modulation&Pitch Category Dynamics&FilterCategory SFX&etc 151Category Multi Stereo-type About the effect algorithms152 C/R Delay Stereo/Cross Delay10 St. Multitap Delay Stereo Multitap Delay 153Auto Panning Delay 11 St.Modulation Dly Stereo Modulation Delay154 Stereo Phaser 155Stereo Flanger Stereo Vibrato156 Stereo TremoloStereo Expander 19 St.Pitch Shifter Stereo Pitch Shifter157 Stereo LimiterStereo Gate Stereo Filter158 Multiband LimiterCategory SFX&etc SFX/Etc effects Talking ModulatorMonaural-type 159Rotary Speaker Mono Reverb Room160 161 162 Mono Wah49 Mn.Ring Modulator Mono Ring Modulator Tube Pre Amp Sim Tube PreAmp Simulator163 164 165 Key does not function when pressed 166Audio files 167Startup 168 169 170 Drives 171CD-R/RW drive PC USB driveAudio CDs and files 172Playing an audio CD Creating an audio CD173 LoadingWAV-format audio files Files on the PC USB drive PC files174 Recorder sectionMidi functionality General175 InputDrum Pattern List 176EQ Library List Name Library ListDemo Song List 177178 179 180 181 182 183 Virtual trackWord clock XLR jackIndex 184185 CD-RWREC/PLAY Mode 186187 USB188 Midi implementation chart 189Korg INC
Related manuals
Manual 9 pages 16.13 Kb