Korg D3200 owner manual Transport keys, 149, Play/Stop Mode

Page 159

20-2. Play/Stop Mode

Here you can specify how the transport keys PLAY and STOP will operate.

2

1

1.Play/Stop Mode

Click an radio button to specify how the PLAY and STOP keys will operate.

Manual

The keys will play and stop in the conventional way.

Loop Play

When you press the PLAY key, the region specified by

LOC 1/IN and LOC 2/OUT will play repeatedly

(p.65). Playback will stop when you press the STOP key.

At this time, the LOOP indicator will light.

If you perform auto-punch in/out recording while Loop Play is on, you’ll be able to record repeatedly; the recorded result will be saved in the Undo list.

Loop Play is unavailable if “MIDI Sync” (p.125) is set to “MTC Slave.”

Stop at Song End

Playback will begin when you press the PLAY key, and will automatically end when you reach the end of the song.

Stop at Song End & Return to Top

Playback will begin when you press the PLAY key. When you reach the end of the song, playback will automatically stop and you will return to the begin- ning of the song.

Stop at Song End & Load Next Song

Playback will begin when you press the PLAY key. When you reach the end of the song, playback will automatically stop and the next song will be loaded.

2.Stop at Mark Point

Playback will pause when you reach a location at which a mark has been assigned.

21. Transport keys

PLAY key

Click this button to begin playback (key lit). This key will blink during fast-forward, rewind, MTC Slave, or Trig Rec Start.

REC key

Arms the record mode. Recording is possible only if at least one track is set to REC. When you press this key, the D3200 will enter record-ready mode (key blinking), and recording will begin when you then press the PLAY key (key lit).

The conditions for initiating recording will differ depending on the RecMode, MMC, and MTC settings.

If the foot switch function is set to “Punch In Out,” you can use the foot switch instead of the REC key.

STOP key

Stops recording or playback.

You can hold down the STOP key and press the REW key to move to the beginning of the song, or hold down the STOP key and press the FF key to move to the end of the song.

FFkey

Fast-forward will occur while you hold down the FF key during playback.

Pressing the FF key while stopped will cause fast-for- ward to continue until you press the STOP, PLAY, or LOC 1/2/3/4 keys.

REW key

Rewind will occur while you hold down the REW key during playback.

Pressing the REW key while stopped will cause rewind to continue until you press the STOP, PLAY, or LOC 1/2/ 3/4 keys.

If the REC/PLAY MODE setting Loop Play is on, perform- ing fast-forward/rewind will cause fast-forward/rewind to continue until you press the STOP, PLAY, or LOC 1/2/3/4 keys.

Counter

Rename

METER

 

MIXER

 

CH

VIEW

EFFECT

 

SEND

 

EQ

 

PAN

 

SONG

 

SYSTEM

/MIDI

TRACK

 

CD

 

Reference

 

 

 

 

 

UNDO

 

 

 

 

TUNER

 

 

 

 

 

 

SESSION

DRUMS

 

 

 

STORE

SCENE

 

 

MARK

 

 

 

 

SCRUB

 

 

 

 

 

 

1/IN ...

4/END

 

 

 

LOC

LOC

 

REC/PLAY

MODE

 

 

Transport

keys

 

149

Image 159
Contents Page Important Safety Instructions Handling of the internal hard disk Data handlingIii Printing conventions in this Manual RW driveTable of Contents Mixer EffectsSession Drums Vii RecorderData Viii ReferenceAppendices Specifications 174 More about drives and files 171Various lists 176 Included items Before using the D3200 for the first timePower on/off Power-onSetting the calendar Power-offPress the SYSTEM/MIDI key Click the Control tab Main features Parts and their function Functions LCD screen Connection exampleInput Mixer scene memories, plus Midi control of mixer parameters Main featuresTrack digital multi-track recorder Session DrumsIntuitive interface designed for ease-of-use CD-R/RW drive for creating backup disk and audio CDsWhat is ? Sophisticated digital editing toolsInput 1, Input 2...INPUT 12 jacks Phantom power switchParts and their function Top panel60 -40 dBu mic input Solo key 13 1-16 key, 17-32 key14 REC/PLAY key CH on keyMark key Direct keysKnob Matrix Scrub keyOn key, standby indicator LOOP, TRIGGER, Auto Punch indicators37 REC/PLAY Mode keys 40 HDD/CD access and Midi indicatorsRear panel About the CD-R/RW drive View Items and functions in the LCD screenRadio buttons List buttonScroll bar/scroll buttons Confirmation buttonSelecting the page mode Selecting and setting parametersBasic operation Selecting a channel Switching between channels 1-16Send and equalizer Editing effectsExamples of operation Connections ConnectionsTurn the D3200 on Please note the following items before you beginAdjust the mix When the demo song ends, press the Stop keyListen to the demo song Create the song Press the Song key to access the SongCreate a new song Name the songConnect a guitar to the guitar input Connect your audio sources to the mixer inputsConnect mics and instruments to the Input jacks Confirm the changesAssign the inputs to channels Adding EQ and Effects Press the EQ key to access the EQ/ATT tab Choose a channelUse the Knob Matrix to adjust the EQ Adjust the EQ settings of channelChoose an effect program Reverb&Delay in the MonoApplying effects to the input sound Choose an effect typeNormal Select the recording status Setting the recording modeRecording Preparations for recordingStart recording PlaybackArm track 2 for recording OverdubbingPress the EQ key to access the EQ/ATT tab Applying effects and EQ to individual channelsApplying EQ to each channel/track Select an effect program Adjusting the panSelecting a master effect Select a track for EQAdjust the return form the master effects Adjusting the Master Effect 1 Send amount for each trackChecking and adjusting the master effect Adjust the send amount of each trackChoose a final effect Make the desired adjustments, and then press the Stop keySet the meters to display the post fader levels Applying an effect to the master bus Final EffectApplying EQ to the master bus Master EQ When you‘re done adjusting the master EQ, press the Stop keyArm the master track for recording Adjust the recording levelRecording the master track Specify a virtual trackSaving your song Writing to a CDCreating a new song Selecting/creating a songSelecting a song from the song list Using the name libraryRenaming a song Selecting a songMixer Effects Session Drums Recorder Switching the counter displaySwitching the information display area LocationMoving to a different location Session Drums Recorder Using the Mark keys to moveMoving to the location assigned to a mark Deleting a markFinding a precise location Scrub Finding a zero-cross pointPress the Scrub key to display the Scrub Moving a song Song editing procedureSong editing Copying a songSaving a song Inputting audio to the mixerAnalog input Protecting a songUsing the tuner Sub input Inputting the digital audio signal from a MD or DATAudio outputs from the mixer Digital inputEQ Equalizer Mixer settingsAdjusting the volume Adjusting the panEQ library Storing and recall- ing EQ settings PairingMaster EQ CH on groups Group settingsMonitor settings Fader groupsAdjusting the cue level Solo settingsMuting a channel Mixer Setup Storing a mixer setupClick the Yes button or press the panel YES key to save Renaming a scene Storing/recalling a sceneStoring a scene Recalling a sceneMidi output Specifying parameters that will be disabled for all scenesEditing and overwriting a scene Controlling scenes via MidiAutomation Scene automationEvent automation Turn Automation on Rec When you play back the song, event recording will beginPlaying back the events Editing eventsHow DSP power is allocated to the effects Number of effects and DSP power for each variety of effectEffect type and size Applying insert effects during recording Using insert effectsUsing master effects Using the final effectFor an insert effect Editing the effectsEditing the effect parameters Storing an effect programSelect the effect that you want to control Using external effectsUsing a pedal or Midi to control an effect Controlling effects from an external deviceD3200 contains 756 drum patterns →p.176 Drum Pat- tern List Listening to drum patternsCreating a drum track for an entire song Pattern Map If you’ve selected Metronome as the groupAuditioning the pattern map Recording with Session DrumsRecording additional tracks as you listen to the drum track Recording patterns on a trackEditing the sound of a drum kit Editing a drum kitSelecting a drum kit Recording directly to the master trackList, select highlight Pattern mapsCreating a pattern map Turn the Click Monitor button off normal displayEditing a pattern map TempoTap tempo Tempo trackSong Guide function Changing the tempo during the songBounce recording RecordingPattern map tempo Basic recordingTrigger recording Switching virtual tracksUsing a foot switch for manual punch-in/out Manual punch-in/outAuto punch-in/out Creating a master track Loop recordingSong Locate Mixer Effects Session Drums Playback Normal playbackLoop playback Copy a track CopyTrk Track editing proceduresTrack editing Playing back an album CD projectUsing the clipboard to copy data to another song Insert blank space InsertTrk Deleting all data of a track Erase a track EraseTrkDelete a track DeleteTrk Deleting track dataReverse a track ReverseTrk Exchange tracks SwapTrkExpand/compress a track ExpCmpTrk Optimizing a track OptimizeTrkVerify the copy-destination Select the expansion/compression modeCopying to a virtual track Select the copy-source virtual trackCreating a fade-in Exchange two entire tracks SwapWholeTrkFade-in/fade-out FadeTrk Swapping entire tracksCreating a fade-out Select NoiseReduction Specify the region where you want to erase punch NoiseEliminating noise NoiseReduction Erasing punch noise ErasePunchNoiseNaming a track Track At OnceErase a silent region EraseSilence Finalize the disc Disc At OnceAlbum CD Project Write the songCheck the CD by playing it back on an audio CD player Song Locate Mixer Effects Session Drums RecorderSpecify the size of the gaps between each track Audition the Album CD ProjectEdit the album CD project. Figure E Ripping a CDCreating a live CD Create a master track for this songBacking up and restoring Backing upBacking up 1 Song Backing up All Data Execute the backupWhen backing up to CD-R/RW When backing up to the PC driveRestoring backed-up data Audio files Importing an audio fileImporting an audio track into the beginning of a track Exporting an audio file Importing an audio file into the middle of a trackExporting an audio file Drive and data compatibility with the Digital Recording Using D32XD and D16XD dataUsing D3200 data on a different model Using data from a different model on the D3200Specifying the PC drive size Specifying the drive sizeRenaming a song drive Checking the hard diskFormatting the hard disk Drive capacity Creating a system recoveryTo keep only the audio data that you are actually using Load systemSharing event data PC driveChecking, renaming, or deleting files Deleting the Undo dataSaving/loading Windows users Windows Me/2000 or laterMacintosh users Mac OS9.0.4 or later Using Midi Midi connectionsMidi messages used by D3200 Synchronizing two D3200 units Using Midi to control the mixerUpgrading the system Downloading the operating systemPress the panel Enter key ClickPoint Calibration dialog box will appearCounter Counter displayTime Disp Type dialog box Meter/Track View Using the name libraryRename Editing a name100 101 2a. CH INPUT/SubMixer2b-2. Fader Group 2b. PAIR/GROUP102 2b-1. Channel Pair2c-2. Automation 2c. FADER/PAN/AUTOMATION103 2c-1. Fader Pan2c-3. Event List 1042c-4. Edit Scene 105106 2c-5. Scene Filter2c-6. Mixer View 2d-2. EQ Library 2d. EQ/ATT/PHASE107 2d-1. EQ/ATT2d-3. Phase 1082d-4. Master EQ 109 2e. Send EFF/AUX/REC2f-1. Solo 2f. SOLO/MONITOR110 2e-5. Rec Send2f-3. Cue Level 2g. Mixer Setup111 2f-2. Monitor3a. Rename 112Ch View Channel Routing ViewEffect Routing 113Techniques for assigning effects 114Insert EFF Effects that can be used simultaneously115 Master EFF1Effect program selection Final EFF PAN116 Master EFF2117 118 119 120 Disk UtilityHDD, CD 121 Edit PC File 122Backup Restore123 Other data files Restore destination124 Album CD Project125 Edit Track 126Virtual Track Master TrackCopyTrk 127Wave dialog box 128DeleteTrk 129InsertTrk EraseTrkA3.WAVE 130SwapTrk ReverseTrkA4. Wave 131OptimizeTrk ExpCmpTrkA3. Virtual 132CopyWholeTrk SwapWholeTrkNormalizeTrk A3. Mode133 FadeTrkBefore execution After execution 134NoiseReduction ErasePunchNoise135 Import FileEraseSilence Export File 136137 11. CD138 11a. Album CD139 11b. Track at once11c. CD Player 140WAV Undo 141Calib 142 Drums Track Mixer 143Pattern Map 144Mark 145Tempo Track Zoom 146147 Rec ModeLOC 1/IN, … LOC 4/END Mixer Navigation Tools148 Play/Stop Mode Transport keys149 Category Dynamics&Filter Category Reverb&Delay150 Category Modulation&Pitch151 Category SFX&etcCategory Multi About the effect algorithms Stereo-type152 153 C/R DelayStereo/Cross Delay 10 St. Multitap Delay Stereo Multitap Delay11 St.Modulation Dly Stereo Modulation Delay Auto Panning Delay154 Stereo Vibrato Stereo Phaser155 Stereo Flanger19 St.Pitch Shifter Stereo Pitch Shifter 156Stereo Tremolo Stereo ExpanderStereo Filter 157Stereo Limiter Stereo GateTalking Modulator 158Multiband Limiter Category SFX&etc SFX/Etc effectsMono Reverb Room Monaural-type159 Rotary Speaker160 161 Tube Pre Amp Sim Tube PreAmp Simulator 162Mono Wah 49 Mn.Ring Modulator Mono Ring Modulator163 164 165 166 Key does not function when pressed167 Audio filesStartup 168 169 170 PC USB drive Drives171 CD-R/RW driveCreating an audio CD Audio CDs and files172 Playing an audio CDFiles on the PC USB drive PC files 173Loading WAV-format audio filesGeneral 174Recorder section Midi functionalityInput 175176 Drum Pattern List177 EQ Library ListName Library List Demo Song List178 179 180 181 182 XLR jack 183Virtual track Word clock184 IndexCD-RW 185186 REC/PLAY ModeUSB 187188 189 Midi implementation chartKorg INC
Related manuals
Manual 9 pages 16.13 Kb