Omega RD260A instruction manual Assigning Different Colors to Channels Dot-printing model

7.8Assigning Different Colors to Channels (Dot-printing model)

7.8Assigning Different Colors to Channels (Dot-printing model)

You can assign any of the six provided colors to any channel. The initial setting is as follows:

ch.1 = purple ch.2 = red ch.3 = green ch.4 = blue ch.5 = brown ch.6 = black

SETTING PROCEDURE:

Enter the SET UP mode by turning ‘ON’ the power while pressing and holding the [CH

UP] (ENT) key until the SET UP display appears.

Use the [] key to select the display []. Press the [ENT] key.

Select the channel No. for which you want to change a color. Then press the [ENT] key.

Select the color. Then press the [ENT] key. The display [] will appear.

Before leaving the SET UP mode, you have to store your new settings. Use the [] key

to select the [		] display, and press the [ENT] key.
Select [	]	to keep your new settings or [	] to abort the settings, and

press the [ENT] key. After a few seconds, the OPERATION mode will appear.

7. SET UP MODE

7 - 9