NOTE If the [ENT] key is pressed while setting the numeric codes, the indication
changes to [ 
], and the numeric codes already set stay valid. However, pressing the [ESC] key turns them invalid.
(10)The indicator displays [ 
], and the dot carriage will move to the adjusted position.
Confirm the dot carriage position and press the [ENT] key.
(11) The indication returns to [ | ] or [ | ]. When you want to carry out the | |||
position adjustment again, press the [ENT]key and carry out step (9) again. When | |||||
another adjustments are required, select [ | ], [ | ] or [ | ] again | ||
by pressing the [ | ] key. In order to finish the adjustment, press the [ESC] key to | ||||
return to the [ | ] indication. |
|
|
| |
(12)Before leaving the SET UP mode, its contents should be stored.
Select [ 
] by pressing the [
] key, and press the [ENT] key.
(13)Select [ 
] to keep setting values valid, or select [ 
] to abort them by pressing the [
] key, and press the [ENT] key.
The SET UP mode finishes, and several seconds after, the mode returns to the OPERATION mode.
4. DAILY OPERATION/MAINTENANCE
4 - 19