Check for GAS Leaks

GAS INSTRUCTIONS

CHECK THE FLEXIBLE HOSE TO MANIFOLD CONNECTION

The natural gas hose has been attached during the manuafacturing process. We do recommend that the hose to gas manifold connnection be leak tested, following guidelines in this Owner’s Guide, prior to barbecue operation.

DANGER

Do not use an open flame to check for gas leaks. Be sure there are no sparks or open flames in the area while you check for leaks. Sparks or open flames will result in a fire or explosion which can cause serious bodily injury or death and damage to property.

WARNING: You should check for gas leaks every time you disconnect and reconnect a gas fitting.

Note: All factory-made connections have been thoroughly checked for gas leaks. The burners have been flame-tested. As a safety precaution however, you should recheck all fittings for leaks before using your Weber® gas barbecue. Shipping and handling may loosen or damage a gas fitting.

WARNING: Perform these leak checks even if your barbecue was dealer or store assembled.

You will need: a soap and water solution, and a rag or brush to apply it.

Make sure side burner is off (See LEAK CHECK PREPARATION). Remove valve control knob and screws. Remove porcelain top.

To perform leak checks: Slide back the collar of the quick disconnect (1). Push male fitting of the hose into the quick disconnect, and maintain pressure. Slide the collar closed (2). If it does not engage or lock, repeat procedure. Gas will not flow unless the quick disconnect is properly engaged.

Turn on gas supply.

Check for leaks by wetting the connections with the soap and water solution and watching for bubbles. If bubbles form or if a bubble grows, there is a leak.

Note: Since some leak test solutions, including soap and water, may be slightly corrosive, all connections should be rinsed with water after checking for leaks.

WARNING: Do not ignite burners when leak checking.

CHECK:

1) Hose to manifold connection.

WARNING: If there is a leak at connection(1), retighten the fitting with a wrench and recheck for leaks with soap and water solution. If a leak persists after retightening the fitting, turn OFF the gas. DO NOT OPERATE THE GRILL. Contact the Customer Service Representative in your area using the contact information on our web site.

Log onto www.weber.com®.

2) Hose to quick disconnect connection.

3) Valves to manifold connection.

WARNING: If there is a leak at connections(2) or(3) turn OFF the gas. DO NOT OPERATE THE GRILL. Contact the Customer Service Representative in your area using the contact information on our web site.

Log onto www.weber.com®.

When leak checks are complete, turn gas supply OFF at the source and rinse connections with water.

210/310

*The grill illustrated may have slight differences than the model purchased.

WWW.WEBER.COM®

E/EP - 210/310 specifications

The Spirit E/EP - 210/310 is an innovative electric aircraft model that marks a significant milestone in the realm of sustainable aviation. It has been engineered to cater to a vast array of applications including pilot training, aerial tours, and short-distance commutes, making it a versatile asset for various aviation stakeholders.

One of the most notable features of the Spirit E/EP series is its advanced electric propulsion system. This technology significantly reduces noise pollution and operational costs, making it an environmentally friendly alternative to traditional aircraft. The E version is tailored for electric-only operations, while the EP model is equipped for hybrid configurations, offering flexibility for various operational needs.

The Spirit E/EP has a sleek aerodynamic design, which enhances its flight efficiency and overall performance. The aircraft's lightweight composite materials not only contribute to its agility in the air but also help in maximizing its battery efficiency. This combination of materials and design allows for exceptional glide ratios, which extend flight times and reduce energy consumption.

The cockpit of the Spirit E/EP is engineered with modern avionics, providing pilots with a user-friendly interface and real-time data displays. Equipped with state-of-the-art navigation systems and autopilot technology, the aircraft ensures a smooth flying experience and simplifies pilot training processes. This modern approach to avionics is poised to attract flight schools looking to integrate cutting-edge technology into their training programs.

In terms of safety, the Spirit E/EP series is equipped with multiple redundancies in critical systems, ensuring that both training and commercial operations can proceed with an enhanced sense of security. The aircraft also features robust energy management systems that optimize battery usage and increase overall safety during flight.

The Spirit E/EP's operational cost is significantly lower than conventional piston-engine aircraft, primarily due to reduced fuel expenses and maintenance needs. This economic efficiency makes it an attractive option for flight schools and private operators alike, promoting broader adoption of electric aviation.

In conclusion, the Spirit E/EP - 210/310 showcases the future of aviation. With its innovative electric propulsion technology, lightweight construction, advanced avionics, and cost-effective operation, it stands as a testament to the shift towards sustainable aerospace solutions. This aircraft is not just a means of transportation; it is a step towards a greener and more efficient aviation industry.