KitchenAid KFRU271VSS installation instructions Outdoor Grill Care, Replacing the Batteries, Style

OUTDOOR GRILL CARE

Style 1 Style 2

1.Unplug grill or disconnect power.

2.To remove glass light cover, remove screw and pull out light assembly.

A

B

A.Screw

B.Light assembly

3.To remove the glass cover, gently pry apart the glass cover and the light housing using a flat-blade screwdriver between the glass cover and the clip.

A

A.Clip

4.Loosen the 2 screws in the bulb socket and pull out the bulb.

A

A.Screws

5.Replace bulb with a new 12-volt, 25-watt maximum, halogen bulb, using a tissue or wearing cotton gloves to handle the bulb. To avoid damaging the bulb, do not touch the bulb with bare fingers.

6.Tighten the 2 screws in the bulb socket.

7.Replace glass light cover by placing the cover into the clips and snapping into the light housing. Replace and tighten the screw.

8.Plug in grill or reconnect power.

1.Unplug grill or disconnect power.

2.To remove glass light cover, remove screw and gently pry downward with a small flat-blade screwdriver at the left edge of the cover near the screw, and pull away from the retainer.

A

A.Screw

3.Remove bulb from socket.

4.Replace bulb with a new 12-volt, 10-watt maximum, halogen bulb, using a tissue or wearing cotton gloves to handle the bulb. To avoid damaging the bulb, do not touch the bulb with bare fingers.

5.Replace glass light cover by placing end without clip into the clip mounted on the grill. Snap the screw end into place and tighten the screw.

6.Plug in grill or reconnect power.

Replacing the Batteries

(on some models)

Follow these directions if the batteries need to be replaced.

1.Open the outer cover of the battery compartments, located in the grill cabinet near the right side panel.

B

B

A

A. Outer battery compartment cover

B. Inner battery compartment covers

33