When the 20 lb LP gas fuel tank is Low:
1.The Electronic Display will display “LO” when the 20 lb LP gas fuel tank is low.
NOTE: When the Electronic Display shows “LO”, your 20 lb LP gas fuel tank is low. The burner flames may seem smaller than when the tank is full.
Mode 2 - Timer
The Timer can be set in hours and minutes up to 12 hours and 59 minutes, then counts down the set time.
To Set:
1.Press the Mode button until the timer indicator light comes on.
2.Press the Time Set Button to increase the time by 1 minute or press and hold the Time Set button to increase the time rapidly.
3.When desired time is set, press the Start/Reset button once to start the timer countdown. When the set time ends, reminder tones will sound.
4.Press Start/Reset button to reset the Timer or cancel the reminder tones.
NOTE: The minute timer will continue counting down until the set time ends or the Start/Reset button is pushed to cancel the timer.
Mode 3 - Flame Time™ Feature
The Flame Time™ feature automatically shuts off gas to the burners 10 minutes after set time has expired. This feature can be set for 1 to 60 minutes.
Flame Time™ mode can be used to keep grill burning for a set amount of time for grilling or for burn off of the grill grates.
For burn off of grill grates
With the lid closed and the main burners on HI, residue will burn off the main grill grates. After the grill shuts off and is cool, the grates can be scraped off more easily. The recommended time for burn off is 45 minutes.
For Timed Grill “ON”
To set the amount of time for grilling, follow the steps the same as
To set Flame Time™ mode for burn-off:
1.Light all main burners and set them on HI and close the hood.
2.Press the “Mode” button until the indicator light for Flame Time™ feature comes on.
3.Press the “Time Set” button to the amount of time you want the grill to be on. The recommended time for burn off is 45 minutes.
4.Press “Start/Reset” button to start the Flame Time™ feature timer countdown. When the set time ends (00:00), the reminder tone will sound.
■If the Start/Reset button is pushed within 10 minutes after the Flame Time™ mode timer reaches 00:00 the fuel shutoff valve will not close automatically. The Flame Time™ mode timer can be reset and continue the burn- off or timed grill and the timer will count down the new set time.
■If the Start/Reset button is not pushed within 10 minutes after Flame Time™ mode timer reaches 00:00 the fuel shutoff valve will close automatically and the display for the Flame Time™ feature will be off. If the mode button is pushed, “E1” will appear in the display if there is at least one valve still turned on. The tone will sound one time. If Mode button is pushed a second time the Fuel time remaining will be displayed.
■If the valves are shut off while the Flame Time™ mode timer is counting down, it will stop counting and keep the data. If the start/reset button is pushed when the valves are turned on again, the Flame Time™ timer will continue to count from the last stored data.
5.Press Start/Reset button to cancel this feature or the reminder tones.
NOTE: All of the burner valves must be turned to the off position before grill can be lit after a Flame Time™ cycle has been used.
Lights
1.Press the lights button to turn the lights inside the grill hood “On” or “Off.”
NOTE: The power supply must be plugged in for lights to work. If lights do not work, see “Outdoor Grill Care” section for changing the light bulbs.
21