Kenmore 148.1615421 manual Rear Panel

Loosen the 4 screws at the corners of the bottom panel 3 to 4 turns.

Place the holes in the base of each side panel over the loosened screws and slide the panel to the front until it stops. Retighten the screws.

Use six 3/16-24 x3/8 in. screws to fasten the rear panel to side panels.

Left Panel Rear Panel

3/16-24 x 3/8 in. Screw

Qty. 6

Right Panel

Bottom Panel

Remove the cap and nut from the electrical igniter. Use the nut to assemble the igniter and igniter housing to the left panel as shown. Screw cap onto igniter.

16