7.Install the Door Bracket to the inside of front Cart Legs. Align the threaded holes on the Door Bracket with the holes on Cart Legs. Tighten securely using 4 of the 1/4"x2" Pattern Head Screws provided. (See Figure 3 on page 13)
Upper door bolt holes (at ends of bracket) must face outward.
[] Installing The Cabinet Doors
For LP Gas grills:
1.Install the Door Stops to the Cart Bottom Shelf and the Door Bracket. See Figure 4a.
2.Align the holes on the Door Stops with the threaded holes on the top of the Cart Bottom Shelf and bottom side of Door Bracket. Tighten securely using 4 of the 1/4"xl/2" Pattern Head Screws provided. See Figure 4a.
3.Remove the white protective film from the stainless steel Doors. Attach a Door Handle to
each Door using 2 of the M4x5mm Pattern Head Screws provided. See Figure 4b. Be careful not to scratch the Door surfaces.
4.When installing the Doors, make sure the
door bolt holes are located on the hinge sides of the Cart Legs.
5, Install either Door by inserting 1/4"x5/8" partly- threaded bolt through the lower door bolt hole of the Door and into the tapped hole of the Cart Bottom Shelf. Next, align the upper door bolt hole of Door with the tapped hole in the bottom of Door Bracket. Insert 1/4"xl/2" partly- threaded bolt provided. Tighten both bolts securely.
6.Repeat these steps to install the other Door.
7, Install the Cart Spice Basket to the inside of Left Door. Align the threaded holes on the inside of Left Door with the holes on the Cart Spice Basket. Tighten securely using 2 of the 1/4"xl/2" Pattern Head Screws provided. See Figure 4b.
Figure 4a (LP gas model only)
DOOR _
BRACKET
DOORSTOP _
Found in
Hardware Pack
CARTBOTTOM
SHELF/
TANK
TRAY ASSEMBLY
Figure 4b (LP gas model only)
DOOR
UPPER DOOR BRACKET
BOLT HOLE
\\\\\
LEFT DOOR
DOOR_
HANDLE
| \ |
|
l/ | LOW ER DOOR | |
BOLT | HOLE | |
|
| |
CART SPICE |
| BOTTOM |
|
| |
BASKET |
| SHELF |
RIGHT DOOR
14