Aussie Bonza Deluxe, Kanga owner manual Am 5 pm E.S.T Mon. Fri Telephone

Page 4

30.Use of this LP gas grill other than for the intended use, or alteration of this LP gas grill in any way may not be safe and will void any warranty.

31.Never attempt to repair the LP gas grill or cylinder yourself. Contact the manufacturer for information regarding repairs to your grill.

32.LP gas is not natural gas. The conversion or attempted use of natural gas in an LP unit or LP gas in a natural gas unit is dangerous and will void your warranty.

33.Do not use charcoal in an LP gas grill. Do not use aerosols or store flammable liquids or materials near this LP gas grill.

34. WARNING! Do not wear loose clothing (for example: hanging shirt tails, clothing with frills, etc.) around an LP gas grill while in use or hot.

35.Never use an LP cylinder if it shows signs of: dents, gouges, bulges, fire damage, corrosion, leakage, excessive rust or other forms of visual external damage; it may be hazardous and should be checked by a Liquefied Petroleum supplier. Do not use an LP cylinder with a damaged valve.

36.Even though your LP cylinder may appear to be empty, gas may still be present and the cylinder should be transported and stored accordingly.

37.Never store an LP gas cylinder indoors (empty or filled). If storing the gas grill indoors, disconnect LP gas cylinder and store it outdoors out of the reach of children.

38.Never leave an LP cylinder inside a vehicle which may become overheated by the sun.

39.Never lean your body over the LP gas grill when lighting it or while it is in use or hot.

40.Do not attempt to disconnect, move or alter any gas fittings while your LP gas grill is in operation.

41.Your LP gas grill should be cleaned on a regular basis. Refer to Care and Maintenance section in this manual.

42.This LP gas grill is not designed to be used with more than 50% of the cooking area as a solid plate (griddle). Full coverage of plates will cause excessive heat and could damage the grill.

43.Never douse the grill with water when its surfaces are hot because it may cause grease to splatter or the porcelain cooking grids and hood to break.

44.When not in use, the LP cylinder valve must be

turned to “Off” position.

— NOTICE —

AUSSIE GRILL COMPANY STRIVES TO BE A QUALITY SUPPLIER OF CONSUMER PRODUCTS. IF WE INADVERTENTLY OMITTED ANY PARTS NEEDED FOR ASSEMBLY, OR YOU NEED TROUBLESHOOTING INFORMATION, PLEASE CONTACT US USING OUR TOLL FREE NUMBER. THANK YOU FOR PURCHASING AN AUSSIE GRILL COMPANY PRODUCT.

1-(800)-251-7558

8 am - 5 pm E.S.T Mon. - Fri.

1-(423)-639-1171 (TELEPHONE)

1-(423)-639-2570 (FAX)

CONSUMER SERVICE DEPARTMENT AUSSIE GRILL COMPANY

1500 INDUSTRIAL ROAD GREENEVILLE, TN. 37745 USA

www.aussiegrill.com

4

Image 4
Contents AussieTM Important Safeguards Page Am 5 pm E.S.T Mon. Fri Telephone Bonza PART/DESCRIPTIONKanga Bonza PART/ Description QTY Kanga BonzaPART/ Descripton PART# QTY. Kanga Bonza 47 6mm Wheel LEG/ Side Table Assembly Tools Item 1, 2, or 4 Side Table X 1 3/8 Bolt 8pcs X 1 Bolt 8 pcsFixed LEG/SIDE Table Assembly Tools Item 9 8 pcsItem 10 8 pcs Tear Drop Table ShownLegbrace Assembly Tools X 1 Bolt 8 pcs PcsBottom SHELF/LEG & Caster Assembly Tools Item 19, 20X 1 Bolt Wood LEG 1/4 x 1 3/8 Bolt Metal X 2 Bolt Wood 1/4 X 1 3/8 Bolt MetalWHEEL/ Cylinder Bracket Assembly Tools Item 23, 24Item 27 4 pcs X 1/2 BoltGrill BODY/CART ASSEMBLY- Kanga Models Tools Assembly NextItem 30 Spacer 8 pcs Item 31 6mm x 110mm Bolt 8 pcs Item 32 6mm Wing NUTAssemble Grill Body to CART- Kanga Models 6mm X 110mmItem 32 6mm Wing NUT 8pcs Grill BODY/CART ASSEMBLY- Bonza & Bonza Deluxe Models ToolsItem 31 Actual Size 6mm x 110mm Bolt Pcs Continue Assembly of Bonza & Bonza Deluxe Models AT Step Grill BODY/CART ASSEMBLY- Bonza Models6mm x 110mm Bolts Install Burner Tools Attach Decorative Privacy Panel to Cart ALL ModelsNext Or 4 PCSCotter PIN Install from underneath Backside of grill Adjust Tab if greater than 3/1616 GAP Install Ceramic Briquette Trays & Grids ALL Models Install Bottom Body PANEL/GREASE TRAY- ALL Models#8 X 1/2 Screw 2pcs SCREW, #10 X 3/8 Attach Handle to Weather Cover LID Kanga Models Tools#10 X 3/8 Screw Attach Handle and Heat Indicator to Hood Bonza Models Tools Attach LP Cylinder to Grill ALL Models FIG. KLeak Testing to be Performed in a WELL-VENTILATED Area How to perform a leak testGAS, CYLINDER, Hose Regulator Information Connecting/ Disconnecting LP Gas Cylinder to GrillLP Gas Cylinder Precautions Before Using Your LP GAS GrillSelecting a Location LeakTesting Operating the LP GAS GrillLighting the Grill Using the Integra Spark Ignition System Preparation Before CookingTurn LP cylinder handle counter-clockwise on Confirm each burner is lit before lighting another burnerManual Lighting of the Grill Care and Maintenance Check Your Flame End of Cooking SessionTurn off Your LP Gas Grill Grill CookingBurner Maintenance How to clean procelain coated cast iron burnersCleaning the Grill Body Preventive MaintenanceCeramic Briquettes Bottom Panel/ Grease TrayUsing the ignitor Using a matchBurners will not light Low flame or low heatFlare up Flames blow outPersistent grease fire Important Notice Aussie Grill Company Limited Warranty