10 | OPERATING INSTRUCTIONS |
|
|
LIGHTING
Summary lighting instructions are on the control panel.
DANGER
Failure to open the lid while igniting the barbecue’s burners, or not waiting 5 minutes to allow the gas to clear if the barbecue does not light, may result in an explosive
Crossover® Ignition System
Note: The Crossover® ignition system ignites the Front burner with a spark from the igniter electrode inside the Gas Catcher™ ignition chamber.You generate the energy for the spark by pushing the Crossover® ignition button until it clicks.
WARNING: Check hose before each use of barbecue for nicks, cracking, abrasions or cuts. If the hose is found to be damaged in any way, do not use the barbecue. Replace using only Weber® authorized replacement hose. Contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com®.
MAIN BURNER LIGHTING
1)Open the lid.
2)Make sure all burner control knobs are turned OFF. (Push each burner control knob down and turn clockwise to ensure that they are in the off position.)
3)Turn the gas supply valve on.
WARNING: Do not lean over the open barbecue. Keep your face and body at least one foot away from the matchlight hole when lighting the barbecue.
4)Push Front burner control knob down and turn to START/HI.
5)Push the Crossover® Ignition Button several times, so it clicks each time.
6)Check that the burner is lit by looking through the matchlight hole on the front of the cooking box. You should see flame.
WARNING: If the burner does not light, turn the Front burner control knob to OFF and wait 5 minutes to let the gas clear before you try again, or try to light with a match.
7)After the FRONT burner is lit you can turn on the other burner or burners.
Note: Always light the FRONT burner first.The other burner or burners ignite from the FRONT burner.
MAIN BURNER LIGHTING
1 
2
7
5
| 6 |
*The grill illustrated may have | 3 |
slight differences than the model | 4 |
purchased. |
WWW.WEBER.COM®