Brinkmann 810-8650-S, 810-8552-S, 810-8640-S, 810-8750-S, 810-8550-S, 810-8905-S Rotisserie Burner

Cover Bolts

Brass Orifice

Retaining Nut

Existing Rotisserie LP

Gas Orifice

Replacement Rotisserie

Natural Gas Orifice

(identified by number)

Rotisserie Burner 1.32mm (YELLOW)

1.32mm

810-8530-S ROTISSERIE BURNER

CAUTION: Only use specified natural gas orifice for your grill.

Note: It is helpful to keep the screws with the components as they are removed for ease of reassembly.

Step 10

Remove the two screws of panel to gain access to the rotisserie LP valve on back side of grill. Set aside for later use.

Step 11

Using an adjustable wrench to hold the gas line secure, use the open end wrench provided to loosening the gas line retaining nut. With the rotisserie gas supply line detached from the housing, use two wrenches to remove the LP brass orifice from the gas supply line. Replace the LP gas brass orifice with the proper natural gas orifice. (1.32mm YELLOW)

Note: Bending the hose could damage the supply line.

Step 12

Reattach gas supply line to the rotisserie housing by securing with the retaining nut removed in Step 11.

Note: Leave the back panel off until the end of conversion and all gas leak testing has been completed.

Step 13

Re-install rotisserie cover using the bolts that were set aside in Step 10.

20