Brinkmann 810-8752-S, 810-8552-S, 810-8640-S, 810-8750-S 810-8905-S & 810-8907-S Rotisserie Burners

Cover Bolts

Retaining Nut

Brass Orifice

Existing Rotisserie LP

Gas Orifice

Replacement Rotisserie

Natural Gas Orifice

(identified by number)

Rotisserie Burner 1.51mm (BLUE)

1.51mm

810-8905-S & 810-8907-S ROTISSERIE BURNERS

CAUTION: Only use specified natural gas orifice for your grill.

Note:	It is helpful to keep the screws with the
	components as they are removed for
	ease of reassembly.

Step 13

Remove rotisserie cover bolts and remove rotisserie cover to gain access to the rotisserie LP gas orifice on back side of grill.

Step 14

Using an adjustable wrench to hold the gas line secure, use the open end wrench provided to loosen the gas line retaining nut. With the rotisserie gas supply line detached from the housing, use two wrenches to remove the LP brass orifice from the gas supply line. Replace the LP gas brass orifice with the proper natural gas orifice. (1.51mm BLUE)

Note: Bending the hose could damage the supply line.

Step 15

Reattach gas supply line to the rotisserie housing by securing with the retaining nut removed in Step 14.

Note: Leave the back panel off until the end of conversion and all gas leak testing has been completed.

Step 16

Re-install the rotisserie cover using the nuts and bolts that were set aside in Step 13.

Step 17

Carefully replace each burner, making sure burner openings slide over valve nozzles. Screw each burner "foot" down using screwdriver and screws that were set aside in Step 4.

Step 18

Replace warming rack, cooking grills, heat shields and grease trays.

Note: Follow directions in the leak testing section of this manual before using this grill.

8