CONVERSION
INSTRUCTIONS
810-8905-S & 810-8907-S
CAUTION: Some parts may contain sharp edges. Wear protective gloves if necessary.
WARNING: Only use the specific
orifice designated for your grill model. Always double check the millimeter size on the side of the orifice tip prior to installation. Use of any other orifice could lead to personal injury, property damage and void your grill warranty.
Note: Make sure all control knobs are in the off position, LP tank valve is closed and tank is disconnected from regulator and removed from grill.
Step 1
Hold the gas manifold connection with an adjustable wrench and use a 3/4” wrench to undo LP hose connection from gas manifold.
Step 2
Attach 10’ hose to gas manifold. Tighten connection carefully using two wrenches. Take the end of the 10’ hose and place it through the cart back panel exit.
Step 3
Open hood and remove warming rack, cooking grills and heat shields. Set aside for later use.
Back Panel Exit |
|
|
|
|
| Gas Manifold | ||||
|
|
|
|
|
|
|
|
| Connection | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10’ Natural Gas Hose
Warming Rack
Cooking Grills
Heat Shields
5