Sterling SSE-5 BL operating instructions Table of contents

				SSE 5 BL
Table of contents
1.	1. General instructions			1-1
	1.1. Warnings and symbols			1-2
	1.2. Explanations and information			1-3
	1.3. Legal basis			1-3
	1.4. Fields of applications			1-3
	1.5. Notes on usage			1-3
2.	Safety instructions			2-1
	2.1. For your safety			2-2
	2.1.1.	General		2-2
	2.1.2.	Assembly		2-3
	2.1.3.	Operation		2-4
	2.1.4.	Maintenance		2-4
	2.2. For the operating safety of the equipment			2-5
3.	Putting into operation			3-1
	3.1. Checking the pipe system			3-2
	3.2. Adjusting the suction pipes			3-3
	3.3. Setting the controller			3-4
	3.4. Initial conveying operations			3-5
	3.5. Switching off the unit			3-5
4. Error and error correction				6
5.	Maintenance			8
	5.1. Maintenance intervals			10
	5.2. Servicing the conveyor			10
	5.2.1.	Changing the sealing ring of the outlet flap		............................................ 11
	5.2.2.	Adjusting the flap switch		12
	5.2.3.	Cleaning the unit		13
	5.3. Replacing carbon brushes at turbine		Error! Bookmark not defined.
6.	Functional description			15
	6.1. General	...............................................................................................................		16
	6.2. Controller			17
7. Transport, Assembly and Storage				19
	7.1. Transport and Packing			20
	7.2. Assembly			20
	7.3. Storage	...............................................................................................................		20
8.	Assembly instructions			21
	8.1. Assembly			22
	8.2. Mounting on the processing machine			24
	8.3. Mounting onto a machine hopper			24
	8.4. Mounting onto mixing hoppers with lateral inlet			25
	8.5. Mounting onto dosing station DT 30			25
	8.6. Material feed			26
	8.7. Mounting the suction pipe MV			26
	8.8. Pipework			27
	8.9. Electrical connection			27

4