Figure 2-2: Sensor Cable Connection to Analyzer
Note: When the AX300-I instrument is used for diffusion sampling (i.e., incubators, tents, etc.), the plastic flow diverter must be removed from the R17MED sensor. If the sensor is used in breathing circuits, etc, the diverter must be used as shown in Figure 2-3.
Figure 2-3: Mounting the Sensor in the Tee Adapter
2.1.2 Mounting
The AX300-I can be mounted in several ways depending on the optional equipment ordered at the time of purchase. See Section 1.3.
Teledyne Analytical Instruments | 16 |
