SECTION
5.Using
6.The wheelchair should not be lowered until the last stair has been negotiated and the wheelchair has been carried away from the stairway.
ESCALATORS WARNING
DO NOT use an escalator to move a wheelchair between floors. Serious bodily injury may occur.
Transferring to and From Other Seats
WARNING
ALWAYS turn the wheelchair power OFF and engage the clutches to prevent the wheels from moving BEFORE attempting to transfer in or out of the wheelchair. Also make sure every precaution is taken to reduce the gap distance by turning both casters parallel to the object you are transferring onto.
CAUTION
When transferring, position yourself as far back as possible in the seat. This will pre- vent broken screws, damaged upholstery and the possibility of the wheelchair tip- ping forward.
NOTE: This activity may be performed independently provided you have adequate mobility and upper body strength.
NOTE: For this procedure, refer to FIGURE 3.1.
Minimum Gap Distance
1. | Position the wheelchair as close as |
|
| possible along side the seat to which |
|
| you are transferring, with the casters |
|
| pointing parallel to it. |
|
2. | After the wheelchair is positioned |
|
| properly for transfer, verify that the |
|
| clutches are engaged. Refer to | FIGURE 3.1 Transferring to and From |
| Engaging/Disengaging the Clutches on | Other Seats |
| page 61. |
|
3. | Shift body weight into seat with transfer. |
|
During independent transfer, little or no seat platform will be beneath you. Use a transfer board if at all possible.
P9000™ XDT | 22 | Part No. 1118386 |