SECTION 11—BATTERIES
Replacing Battery Box Retaining Strap
WARNING
The battery box retaining strap MUST be fastened securely and adjusted properly to hold battery boxes in place before using the wheelchair.
NOTE: For this procedure, refer to FIGURE 11.10.
1.Remove the battery boxes from the wheelchair. Refer to Removing/Installing the Battery Boxes on page 50.
2.Remove the battery tray from the wheelchair. Refer to Installing/Removing Battery Tray on page 51.
WARNING
The retaining strap MUST be fed through the adjustable end of the battery box retaining strap buckle as shown in FIGURE 11.9.
NOTE: Take note of the position and orientation of the battery box retaining strap as it passes through the slots of the battery tray and the adjustable end of the battery box retraining strap buckle.
3.Feed the existing battery box retaining strap through the adjustable end of the battery box retaining strap buckle.
4.Feed the existing battery box retaining strap through the slots in the battery box tray.
5.Install the new battery box retaining strap by reversing STEPS 3 and 4.
6.Reinstall the battery tray from the wheelchair. Refer to Installing/Removing Battery Tray on page 51.
7.Reinstall the battery boxes from the wheelchair. Refer to Removing/Installing the Battery Boxes on page 50.
Adjustable End
Retaining
Strap Buckle
Retaining |
| Battery | |
Strap | Slots | ||
Tray |
Retaining Slots
Strap
Battery Tray
Retaining Strap 
FIGURE 11.10 Replacing Battery Box Retaining Strap
P9000™ XDT | 60 | Part No. 1118386 |