Invacare P9000 XDT Inspect/Adjust Weekly, Inspect/Adjust Monthly, Inspect/Adjust Periodically

Page 26

SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING

Seat and/or back upholstery have no rips and do not sag. Replace if necessary.

Inspect/Adjust Weekly

Seat is secured to wheelchair frame.

Seat release latch is not worn and is functional. Replace if necessary.

Inspect tires for flat spots and wear. If the tires are pneumatic, check for proper inflation.

Ensure all caster/wheel/fork/headtube fasteners are secure.

Ensure arm pivot points are not worn and/or loose. Replace if necessary.

Inspect/Adjust Monthly

Ensure wheel mounting nuts are secure on drive wheels.

Ensure no excessive side movement or binding occurs when drive wheels are lifted and spun when disengaged (free-wheeling).

Ensure that drive wheel axle bolts and locking tab washers are secure.

Inspect caster assembly has proper tension when caster is spun. Caster should come to a gradual stop.

Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop.

Ensure that the wheel locks engage properly and do not interfere with the tires when rolling. Also, ensure that the pivot points are free of wear and looseness.

Inspect the seat positioning strap for signs of wear. Replace if worn or damaged.

Ensure that the buckle on the seat positioning strap latches. Replace if necessary.

Verify that the hardware that attaches the seat positioning strap to the seat frame is secure and undamaged. Replace if necessary.

Inspect/Adjust Periodically

Ensure wheelchair rolls straight (no excessive drag or pull to one side).

Ensure that all fasteners on the clothing guards are secure.

Ensure arms are secure but easy to release and adjustment levers engage properly.

Ensure adjustable height arms operate and lock securely.

Ensure arm pivot points are not worn and/or loose. Replace if necessary.

Ensure armrest pads sit flush against arm tubes.

Ensure seat and/or back upholstery have no rips and do not sag. Replace if necessary.

Ensure seat release latch is not worn. Replace if necessary.

Seat and/or back upholstery have no rips and do not sag. Replace if necessary.

Clean upholstery and armrests.

P9000XDT

26

Part No. 1118386

Image 26
Contents P9000 XDT P9000 XDT Table of Contents Arms CLUTCH/MOTOR Lock Register Your Product Complete and mail the form on the nextProduct Registration Form Fold here Cut Along Line Special Notes Wheelchair TIE-DOWN Restraints and Seat RestraintsTypical Product Parameters P9000 XDTLabel Locations Important NoticeOperating Information Controller Settings/Repair or ServiceGeneral Guidelines General Guidelines Batteries Electrical AccessoriesTire Pressure Grounding Instructions Charging BatteriesRain Test Weight TrainingWeight Limitation EMI Information EMI Information Coping With Everyday Obstacles SAFETY/HANDLING of WheelchairsStability and Balance Tipping Tipping CurbsLifting/Stairways Transferring to and From Other Seats Escalators WarningPercentage of Weight Distribution Reaching, Leaning and Bending ForwardReaching and Bending Backward Reaching, Leaning and Bending ForwardInspect/Adjust Initially Safety INSPECTION/TROUBLESHOOTINGSafety Inspection Checklists Inspect/Adjust Periodically Inspect/Adjust WeeklyInspect/Adjust Monthly Troubleshooting Mechanical Troubleshooting GuideChecking Battery Charge Level DON’TSPJJoystick Switches and Indicators Wheelchair OperationSPJJoystick Switches and Indicators Information Gauge DisplayWheelchair Operation Display Description Definition Using the Joystick to Drive the Chair Turning the Power On/OffUsing the Horn Operating the WheelchairMove the joystick in the following manner Front Riggings Installing/Removing/Using the Footrest/LegrestInstalling Removing Adjusting the Footrest HeightUsing Raising/Lowering the Legrest Assembly Replacing the Heel LoopRaising/Lowering the Legrest Assembly Adjusting Armrest Height ArmsSwing-Back Arms Replacing Armrest PadSeat and Back Replacing the Seat UpholsteryReplacing the Back Upholstery Replacing the Back UpholsteryAdjusting the Back Height Adjusting the Back HeightReplacing Seat Positioning Strap Replacing Seat Positioning StrapJoystick Preparing the Joystick for UseRepositioning the Joystick Repositioning the JoystickAdjusting Forks CasterWhen to Charge Batteries BatteriesDescription and Use of Battery Chargers Charging BatteriesReplacing the Batteries Connecting the Battery ChargerRecommended Battery Types Removing/Installing the Battery Boxes Cleaning Battery TerminalsInstalling/Removing Battery Tray Removing/Installing Battery BoxesInstalling/Removing Batteries Into/From Battery Boxes Tool QTY CommentsConnecting Battery Cables Place batteries into battery box bottomConnecting Battery Cables Direct Mount MethodBatteries Connecting Battery Cables Direct Mount Method Battery Clamp Method Connecting Battery Cables Battery Clamp MethodBatteries Negative Positive + Replacing Battery Box Retaining Strap 10 Replacing Battery Box Retaining StrapCLUTCH/MOTOR Lock Engaging/Disengaging the ClutchesWheel Locks Installing/Adjusting/Using the Wheel LocksInstalling/Adjusting Installing/Adjusting/Using the Wheel Locks ANTI-TIPPERS Installing/Removing/Adjusting Anti-TippersAdjusting Height Installing/Removing/Adjusting Anti-Tippers Unfolding/Folding the Wheelchair TransportingTransporting the P9000 XDT Transporting the P9000 XDT Limited Warranty USA