SECTION
SECTION 8—SEAT AND BACK
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustment or service verify that on/off switch on the joystick is in the off position.
Replacing the Seat Upholstery
NOTE: For the following procedure, refer to FIGURE 8.1.
1.Remove the mounting screws that secure the existing seat upholstery to the wheelchair frame.
NOTE: Refer to the following table to determine the number of mounting screws for each seat depth.
SEAT DEPTH | NUMBER OF SCREWS |
|
|
16 inch | 8 |
18 inch | 10 |
|
|
2.Remove the existing seat upholstery from the wheelchair frame.
3.Install new seat upholstery by reversing Steps
Mounting Screws
Seat Upholstery
Wheelchair Frame
FIGURE 8.1 Replacing the Seat Upholstery
P9000™ XDT | 40 | Part No. 1118386 |