Emerson Process Management 2051 manual Rosemount, Reference Manual, Flange_Mtl

Rosemount 2051

Reference Manual

00809-0200-4101, Rev AA July 2008

	Index
Parameter	Number	Description
FLANGE_MTL	69	Type of material of the flange. See flange material codes.
		0 = Carbon Steel
		2 = 316 Stainless Steel
		3 = Hastelloy C™
		4 = Monel
		24	= Kynar™
		252 = "Unknown"
		253 = "Special"
FLANGE_TYPE	68	Type of flange that is attached to the device.
		12	= Conventional (Traditional)
		13	= Coplanar
		14	= Remote Seal
		15	= Level; 3 in. 150 lbs.
		16	= Level; 4 in. 150 lbs.
		17	= Level; 3 in. 300 lbs.
		18	= Level; 4 in. 300 lbs.
		19	= Level; DN 80, PN 40
		20	= Level; DN 100, PN 40
		21	= Level; DN 100, PN 10/16
		22	= Level; 2 in. 150 lbs.
		23	= Level; 2 in. 300 lbs.
		24	= Level; DN 50, PN 6
		25	= Level; DN 50, PN 40
		252 = "Unknown"
		253 = "Special"
FREE_TIME	25	Percent of the block processing time that is free to process additional blocks.
FREE_SPACE	24	Percent of memory available for further configuration. Zero in a preconfigured device.
GRANT_DENY	14	Options for controlling access of host computers and local control panels to operating,
		tuning, and alarm parameters of the block. Not used by device.
HARD_TYPES	15	The types of hardware available as channel numbers.
hardware_rev	52	Hardware revision of the hardware that has the resource block in it.
LIM_NOTIFY	32	Maximum number of unconfirmed alert notify messages allowed.
MANUFAC_ID	10	Manufacturer identification number – used by an interface device to locate the DD file for
		the resource.
MAX_NOTIFY	31	Maximum number of unconfirmed alert notify messages possible.
MEMORY_SIZE	22	Available configuration memory in the empty resource. To be checked before
		attempting a download.
message_date	57	Date associated with the MESSAGE_TEXT parameter.
message_text	58	Used to indicate changes made by the user to the device's installation, configuration,
		or calibration.
MIN_CYCLE_T	21	Time duration of the shortest cycle interval of which the resource is capable.
MODE_BLK	05	The actual, target, permitted, and normal modes of the block:
		Target: The mode to “go to”
		Actual: The mode the “block is currently in”
		Permitted: Allowed modes that target may take on
		Normal: Most common mode for actual
NV_CYCLE_T	23	Minimum time interval specified by the manufacturer for writing copies of NV parameters
		to non-volitile memory. Zero means it will never be automativally copied. At the end of
		NV_CYCLE_T, only those parameters which have changed need to be updated in
		NVRAM.
O_RING_MTL	69	Type of material of the flange o-rings. See O-ring material codes.
		10	= PTFE (Teflon TM)
		11 = Viton
		12	= Buna–N
		13	= Ethyl–Prop
		252 = "Unknown"
		253 = "Special"
output_board_sn	53	Output board serial number.

C-8