Emerson Process Management 2051 manual Options, Rosemount, Reference Manual

Rosemount 2051

Reference Manual

00809-0200-4101, Rev AA July 2008

OPTIONS	Standard Configuration
	Unless otherwise specified, transmitter is shipped as follows:
	Engineering Units 2051C: inH2O (Ranges 1-3), psi (Ranges 4-5)
	Engineering Units 2051T:	psi (all ranges)
	Engineering Units 2051L:	inH2O
	4 mA (1 V dc)(1):	0 (engineering units above)
	20 mA (5 V dc)(1):	Upper range limit
	Output:	Linear
	Flange type:	Specified model code option
	Flange material:	Specified model code option
	Drain/vent:	Specified model code option
	Integral meter:	Installed or none
	Alarm(1):	High
	Software tag:	(Blank)

(1) Not applicable to fieldbus.

Tagging (3 options available)

•Standard SST hardware tag is permanently affixed on transmitter. Tag character height is 0.125 in. (3,18 mm), 140 characters maximum.

•Tag may be wired to the transmitter nameplate upon request, 85 characters maximum.

•Tag may be stored in transmitter memory (8 characters maximum). Software tag is left blank unless specified.

Commissioning tag (fieldbus only)

A temporary commissioning tag is attached to all transmitters. The tag indicates the device ID and allows an area for writing the location.

Optional Rosemount 304, 305 or 306 Integral Manifolds

Factory assembled to 2051C and 2051T transmitters. Refer to Product Data Sheet (document number 00813-0100-4839 for Rosemount 304 and

00813-0100-4733 for Rosemount 305 and 306) for additional information.

Optional Diaphragm and Sanitary Seals

Refer to Product Data Sheet (document number 00813-0100-4016 or 00813-0201-4016) for additional information.

Output Information

Output range points must be the same unit of measure. Available units of measure include:

inH2O	inH2O@4 °C(1)	psi	Pa
inHg	ftH2O	bar	kPa
mmH2O	mmH2O@4 °C(1)	mbar	torr
mmHg	g/cm2	kg/cm2	atm

(1) Not available on low power.

Hardware Adjustments

D4 Local zero and span adjustments

• Alarm and security adjustments ship standard

A-22