Replacing Belt
Belt
Courroie
Correa
Motor Shaft | Agitator | |
Arbre d’entraînment | ||
Agitateur | ||
du moteur | ||
Agitador | ||
Eje del motor | ||
| ||
+ |
|
Groove | End Cap | |
Ouverture | Bouchon | |
Ranura | ||
Tapa del extremo | ||
|
➢Remove worn or broken belt.
➢Loop new belt (Panasonic Type UB8 only) around motor shaft and belt pulley; see illustration for correct belt routing.
➢Reinstall agitator back into nozzle housing grooves.
➢After reinstalling the agitator, turn it by hand to make sure that belt is not twisted or pinched and that all rotating parts turn freely.
➢Reinstall lower plate.
Cleaning Agitator
➢ Clean agitator after every five uses and every time the belt is replaced.
➢ Remove lower plate.
➢ Cut off any carpet pile and lint entangled around agitator with a pair of scissors.
➢ Remove agitator.
➢ Remove any string or debris located on the end caps.
➢ Reinstall agitator and lower plate.
- 26 -