Removing Clogs
Hose
Tuyau
Manguera
Hose Holder
Hose
Tuyau
Manguera
If the vacuum cleaner does not seem to have adequate suction, first check if the dust bin is full or if a filter is clogged.
➢Turn off and unplug the vacuum cleaner.
➢Remove dust bin and check for clogs.
➢Check the extension hose area.
➢Visually inspect the tools, the hose, and the hose holder area into which the hose is connected.
➢Remove any visible clog.
➢Plug in the vacuum cleaner and turn it on.
➢Stretch the hose to maximum length and then allow the hose to return to its storage length.
Tab | Hose Cover |
Languette | Couvercle |
Pestaña | du tuyau |
| Cubierta de |
| manguera |
Hose Holder |
Soporte de |
la manguera |
Nozzle Hose |
Tuyau court |
Manguera de |
la boquilla |
➢If the dust bin and filter areas and the hose areas are free of clogs, check the nozzle area.
➢Press tab and remove hose cover.
➢Remove nozzle hose from hose holder by pressing locking tabs and pulling down on the nozzle hose (it may be necessary to slightly twist the nozzle hose to loosen from the hose holder).
➢Inspect inlet of nozzle hose and clear any obstructions.
➢Replace nozzle hose and hose cover.
➢Return the vacuum cleaner to the upright position before plugging into an electrical outlet.
- 46 -