Philips HQ6710, HQ6725, HQ6730, HQ6707 manual Unit, press the wheel and turn it clockwise

16English

may take several weeks before optimal shaving performance is restored.

4Remove the hairs with the brush supplied.

5Put the shaving heads back into the shaving unit. Put the retaining frame back into the shaving

unit, press the wheel and turn it clockwise.

6To prevent long hairs from obstructing the shaving heads, remove the shaving heads once a

month and clean them with the brush supplied.

,Cause 3: the shaving heads are damaged or worn.

,Solution 3: replace the shaving heads. See chapter ‘Replacement’.

3The shaver does not work when the on/off button is pressed.

,Cause 1: the batteries are empty

,Solution 1: recharge the batteries. See chapter ‘Charging’.

,Cause 2: dried-up shaving gel/lotion is blocking the shaving heads.

,Solution 2: clean the shaving heads thoroughly. See chapter ‘Cleaning and maintenance’.

,Cause 3: the shaving heads are damaged.

,Solution 3: replace the shaving heads. See chapter ‘Replacement’.

4The cover of the cartridge compartment cannot be closed

,Cause 1: the cartridge has not been inserted correctly.

,Insert the cartridge correctly. It only fits properly into the shaver if the white side of the pump is pointing upwards.

,Cause 2: the cartridge has not been pushed far enough into the shaver.

,Solution 2: press the cartridge until it locks into position with a click.