Philips owner manual Heartstart M5066A

Page 16

2-2

3.Insert the cartridge into the cartridge well on the front of the defibrillator. It should click into place when properly seated. The green PULL handle should be all the way down.

NOTE: To prevent the pads’ adhesive gel from drying out, do not open the hard cover or film seal of the cartridge until you need to use the pads.

4.Remove the battery from its packaging. Install it in the battery compartment on the back of the defibrillator.

Philips Medical Systems

5.The HeartStart will automatically run a self-test when the battery is inserted. Press the Shock button when instructed. When the self-test is over, the defibrillator will report the result, and tell you to push the green On/Off button in case of an emergency. (Do not push the green button unless this is an actual emergency.) Then the defibrillator will turn off and go to standby mode.

The green Ready light will be blinking to show the HeartStart is ready for use.*

NOTE: Always store the HeartStart with a pads cartridge and a battery installed, so it will be ready to use and can perform daily self-tests.

*As long as a battery is installed, turning the HeartStart “off” puts it into standby mode, which means that it is ready for use.

HEARTSTART M5066A

Image 16

Contents M5066A EditionIntentionally blank HeartStart Defibrillator M5066A Pads Cartridge HandleOn/Off Button. Press this Information Button. ThisIntentionally blank Quick Reference Intentionally blank HeartStart Important NoteIntentionally blank About this edition Edition historyCopyright Authorized EU representativeIntentionally blank Contents Appendices Introduction to the HeartStart Description Sudden Cardiac Arrest Indications for UseNational and local requirements Training and practiceFor more information Setting up the HeartStart Package contentsHeartstart M5066A Pads Cartridge, place it in the storage area in the case Recommended accessories Using the HeartStart OverviewPull the green handle Place the pads Press the Shock button If a shock is neededTreating infants and children Remove the Infant/Child Pads Cartridge from its packageWhen emergency medical services arrive Do not Delay TreatmentPhilips Medical Systems Heartstart M5066A After each use After using the HeartStartHeartStart data storage Heartstart M5066A Maintaining the HeartStart Routine MaintenancePeriodic checks Troubleshooting tips Cleaning the HeartStartDisposing of the HeartStart Accessories for the HeartStart REF 68-PCHATHeartstart M5066A Glossary of terms AEDCPR ECGNSA Smart NSA pause SCA Symbol Description Glossary of symbols/controlsDefibrillator and opens pads cartridge for use Lithium manganese dioxide battery Cartridge contents one set of two defibrillation pads Symbol Description Patient handling Precautions Contact with the patientRegularly for damage, according to directions Metal objects such as a bed frame or stretcherHeartStart Defibrillator specifications Technical informationPhysical EnvironmentalControls and indicators Category SealingDefibrillation Waveform Category Waveform parametersDelivered Current a Energy JShock-to-shock cycle time Disarm AED modeNewborn 14 J/kg Category Function Shockable rhythms Non-shockable rhythms ECG analysis systemAnalysis protocol ECG analysis performance Accessories specifications Battery M5070ACategory Specifications Battery type Prior to insertion Standby lifeWhole and may also endanger human health Environmental considerationsRegulations Configuration Parameter Speaker volumeDevice options ECG out dataPatient treatment protocol options NSA pause type Settings Standard NSADuring a Smart NSA pause, Pause HeartStart Monitoring duringCPR4 Installed Infants and children when an infantChild pads cartridge is installed Yes, NoHeartstart M5066A Testing Testing and troubleshootingTroubleshooting Green Ready light is solid HeartStart tells you Troubleshooting while the HeartStart is in useTo insert a pads cartridge HeartStart tells you To stop all motion Contact Philips for service if needed Troubleshooting while the HeartStart is not in useGreen Ready light is not on Behavior Electromagnetic conformity Electromagnetic emissionsEmissions test CisprElectromagnetic immunity Separation distance according to frequency of transmitter m Important warnings and reminders Environmental considerationsIntentionally blank Intentionally blank Intentionally blank Intentionally blank Intentionally blank REF M5066-91901

Related manuals

Manual 68 pages 2.08 Kb