Invacare 1114851, X-Terminator Titanium, X-Terminator QR, T-5 Tennis Elite, Terminator BB Stairways

Page 22

SECTION 2—SAFE HANDLING

WARNING

When lowering the front casters of the wheelchair, DO NOT let the wheelchair drop the last few inches to the ground. This could result in injury to the occupant and/or damage to the wheelchair.

Roll the wheelchair backward and slowly lower the wheelchair in one continuous movement. DO NOT let the wheelchair drop the last few inches to the ground. This could result in injury to the occupant. Turn the anti‐tippers so the wheels are facing down.

Stairways

WARNING

Concerning stairway access: Invacare does not recommend that wheelchairs be transported up or down stairways with occupant in the wheelchair. Possible injury to occupant and/or assistant(s) can occur. Transfer to an everyday use wheelchair is recommended.

DO NOT attempt to lift the wheelchair by any removable (detachable) parts. Lifting by means of any removable (detachable) parts of a wheelchair may result in injury to the user or damage to the wheelchair.

Extreme caution is advised when it is necessary to move an occupied wheelchair up or down a stairway. Invacare recommends that, if possible, the user be removed from the wheelchair prior to moving. Invacare recommends using two assistants and making thorough preparations. Make sure to use ONLY secure, non-detachable parts for hand-held supports.

Follow this procedure for moving the wheelchair between floors when an elevator is NOT available:

1.If equipped, turn the anti‐tippers up. Refer to Footrest/ Anti‐Tipper on page 62.

2.After the wheelchair has been tilted back to the balance point, one assistant (in the rear) backs the wheelchair up against the first step, while securely grasping a non‐removable (non‐detachable) part of the wheelchair for leverage.

Image 22
Contents Everyday and Sport Series Wheelchairs Everyday and Sport Series Wheelchairs Table of Contents Wheels Suspension Register Your Product Complete and mail the form on the nextProduct Registration Form Fold Here Cut Along Line Special Notes Wheelchair TIE-DOWN Restraints and Seat Positioning StrapsTypical Product Parameters TerminatorTypical Product Parameters Terminator Titanium Titanium Paul Schulte Signature BB Transformer ALL-SPORT Stability Warning General GuidelinesOperating Information General Guidelines Weight Limitation Weight TrainingTire Pressure and Information Safe Handling Stability and BalancePercentage of Weight Distribution Coping with Everyday ObstaclesReaching, Leaning and Bending Forward Reaching, Leaning BackwardsTipping Tipping CurbsStairways Transferring To and From Other Seats Safety Inspection Checklist Safety InspectionInspect Initially Inspect/Adjust Weekly Inspect/Adjust MonthlyTroubleshooting Inspect/Adjust PeriodicallyMaintenance Safety Precautions MaintenanceSuggested Maintenance Procedures Safety Inspection Back Back Angle AdjustmentUnfolding/Folding the Back Back Angle Adjustment Installing Foldover Back Upholstery Removing/Installing Foldover Back UpholsteryRemoving Foldover Back Upholstery Replacing Adjustable Tension Back Upholstery Adjustable Tension Back UpholsteryAdjustable Tension Straps Back Upholstery CoverBack Height Adjustment Adjustable Backs Only Back Original Back Height in Inches Removing/Installing Rear Wheels WheelsAdjusting Quick-Release Axles Replacing Quad-Release AxlesAnd/or Out Adjusting Quad-Release HandlesRemoving Play from Rear Wheels Handrim Replacement Repairing/Replacing Rear Wheel, Tire/TubeOpening/Closing Camber Clamps Opening/Closing Camber Clamps Camber Tube Adjusting Rear Wheel CamberA4 Camber System Determining Toe In/Toe Out Adjusting Toe In/Toe Out Adjusting Toe In/Toe Out Camber TubeCourse Adjustment Fine Adjustment Adjusting Wheelbase Length Adjusting Center of Gravity 11 Adjusting Toe In/Toe Out A4 Camber System Fine Adjustment12 Adjusting Wheelbase Length Adjusting Center of Gravity Adjusting Wheelbase Width 13 Adjusting Wheelbase Width Camber Tube14 Adjusting Wheelbase Width A4 Camber System Replacing Axle TubeWheels Adjusting the Axle Tube 16 Adjusting the Axle Tube Camber Tube 17 Adjusting the Axle Tube A4 Camber System Replacing/Adjusting Casters Repeat Steps 1‐3 for the opposite caster if necessaryAdjusting Front Caster Height Parallel to the floorWheel Lock Adjustment/Replacement 20 Wheel Lock Adjustment/Replacement Replacing Adjustable Tension Seat Upholstery SeatReplacing Adjustable Tension Seat Upholstery Replacing Screw-On Seat UpholsteryAdjusting Front Seat Height Adjusting Transformer Seat HeightAdjusting Rear Seat Height Adjusting Transformer Seat Height Footrest ANTI-TIPPER Adjusting the FootrestReplacing the Footrest Installing Installing/Adjusting Optional Clamp on Raised FootrestReplacing/Adjusting Optional A4 Footrest AdjustingAdjusting Footplate Angle Installing the X-Terminator FootrestAdjusting Footplate Depth Angle Adjusting the X-terminator and Transformer FootrestsDepth Terminator HeightAdjusting/Replacing Anti-tipper Adjusting Anti-tipper Replacing Anti-tipperInstalling/Depth Adjustment Installing/Removing/Adjusting Swivel Anti-TipRemoving Adjusting Height Paul Schulte Signature BB and T-5 Tennis Elite Models onlySuspension Elastomers and Suspension Replacing Rear ElastomersReplacing Front Elastomers Replacing Rear ElastomersReplacing Front Elastomers Installing/Removing the Wing/Bumper WING/BUMPERWING/BUMPER Limited Warranty USA