Invacare Terminator BB, X-Terminator Titanium, X-Terminator QR, T-5 Tennis Elite Adjusting Height

SECTION 7—FOOTREST/ ANTI-TIPPER

Adjusting Height

NOTE: For this procedure, refer to FIGURE 7.2.

All Wheelchairs with Swivel Anti-tip Except Paul Schulte Signature BB and T-5 Tennis Elite Models

1.To adjust the height of the swivel anti‐tip, remove dust cover and loosen set screw on swivel anti‐tip caster assembly (FIGURE 7.2).

2.Set anti‐tip caster wheel to desired height. Tighten set screw and reinstall dust cover.

Paul Schulte Signature BB and T-5 Tennis Elite Models ONLY

NOTE: For this procedure, refer to FIGURE 7.2, Detail A.

1.Remove the dust cover on the anti‐tip caster fork assembly.

2.Remove the locknut that secures the anti‐tip caster fork assembly to the anti‐tipper.

3.Adjust the height of the anti‐tip caster fork assembly to the desired height by either adding or removing spacers from the fork stem.

4.Reinstall locknut and dust cover onto the wheelchair.

DETAIL “A”
Dust Cover	Locknut
Anti-Tippers	Spacers

Anti-Tippers

	Anti-Tipper	Anti-Tip
	Receiver
		Caster Fork
	Set Screw	Assembly
NOTE: View
facing back of	Anti-Tipper
wheelchair.

FIGURE 7.2 Installing/Removing/Adjusting Swivel Anti-Tip

Part No 1114851 69 Everyday and Sport Series Wheelchairs