Invacare Transformer All Sport, X-Terminator Titanium, X-Terminator QR Adjusting the Axle Tube

SECTION 5—WHEELS

Rear of			A4 Camber System
Wheelchair	Slot in
Notch in	Axle Tube
Axle Tube
Toe Adjustment		Camber	Front of
Ring			Wheelchair
		Insert
Camber	Set Screw		Camber Tube 2000
Insert
	Axle
	Tube
Camber		Rear of
Clamp		Wheelchair

Indexing Ring

NOTE: Suspension option not shown for clarity. Axle tube installs in the same manner as pictured above.

FIGURE 5.15

Camber

Clamp

Axle

Tube

Front of

Wheelchair

Replacing Axle Tube

Adjusting the Axle Tube

WARNING

QUICK RELEASE LEVERS - Make sure the quick release levers are in the closed position before using the wheelchair, otherwise injury or damage to the wheelchair may occur.

STANDARD and suspension camber clamps - Make sure the hex screws are securely tightened before using the wheelchair, otherwise injury or damage to the wheelchair may occur.

CAUTION

A4 CAMBER SYSTEM ONLY - DO NOT close the quick-release levers or tighten the hex screws without camber inserts in the axle tube. Damage to the axle tube will occur.

NOTE: Stand behind the wheelchair to determine left or right.

Part No 1114851 51 Everyday and Sport Series Wheelchairs