SECTION
Coved Washer
Footrest
Tubing
Mounting Screw/
Threaded Sleeve
Adjustment Holes
Half Clamp
Mounting Screw
Half Clamp
Coved Washer
FIGURE 7.5 Adjusting the X-terminator and Transformer Footrests - Transformer Height
Adjusting/Replacing Anti-tipper
WARNING
Ensure both
NOTE: For this procedure, refer to FIGURE 7.1.
NOTE: To ensure the correct model anti‐tipper is used refer to FIGURE 7.1. Measurements for anti‐tippers are approximate and are taken using the top adjustment hole on the anti‐tipper (Detail ʺAʺ).
Everyday and Sport Series Wheelchairs | 66 | Part No 1114851 |