Invacare Arrow Υspreader Bar, ΥSPREADER BAR Inches, ΥHeight of Spreader Bar from Bottom of Back

UPHOLSTERY/POSITIONING STRAP			PROCEDURE 5
NOTE: When replacing the back upholstery, back as-		HEAVY DUTY MODELS
sembly or changing back height, follow these guidelines		NOTE: Spreader bar required on all back heights.
for spreader bar height:		BACK HEIGHT	υSPREADER BAR
STANDARD MODELS
			HEIGHT
BACK HEIGHT	υSPREADER BAR	16-17-inches	5-inches
	HEIGHT	18-24-inches	7-inches
16-inches*	5-inches	υHeight of Spreader Bar from Bottom of Back
17-inches*	5-inches
		Canes to Top of Spreader Bar Clamp.
18-19-inches*	7-inches
20-24-inches	7-inches	15. If applicable, reposition the spreader bar at the correct
NOTE: Spreader Bar required on ALL back heights be-
tween 20-24-inches. *Spreader bar required on back		height for the corresponding back height and torque
		the mounting hardware to 60-in/lbs.
heights 16,17,18, or 19 ONLY if the width or depth of the
		16. Reinstall the armrest onto the wheelchair. Refer to IN-
chair exceeds 19-inches.		STALLING/REMOVING FLIP BACK ARMRESTS in
υHeight of Spreader Bar from Bottom of Back
		PROCEDURE 4 of the owner’s manual, 1081227.
Canes to Top of Spreader Bar Clamp.

	Locknuts
Back Cane	(STEPS 5, 6)
(STEPS 3, 12)
Mounting
Screw
(STEPS 3, 14)	Spacers
Washer	(STEPS 5, 6)
(STEPS 3, 14)
Back
Upholstery	Locknut
(STEPS 3, 7)
	(STEP 2)
Locknut	Spreader Bar
(STEP 2)
	(STEPS 2, 7, 16)
	Mounting Screw
Mounting	Torque to 60 in/lbs
Screw	(STEP 2)
(STEP 2)	Mounting
	Screws
Insert	(STEPS 5, 6)
Washers	Washers
	(STEPS 5, 6)
(STEPS 5, 6)
Mounting Screws	Seat Frame
Torque to 75 in/lbs
(STEPS 5, 6)	FIGURE 2 - REPLACING BACK UPHOLSTERY
	21

U P H O L S T E R Y

P O S I T I O N I N

G

S T R A P